20 Most Recent
Xerox Phaser 8550DP Printer - Page 9 Questions & Answers
Ppt presentation
i forget my printer password to setup the network it is imagerunner 2520, may someone help me?
Heat tempreture in Phaser 3200 MFP Fusing part
This option does not need to be changed unless you are getting a overheat error. If you lower the heat on the fuser this can result in image transfer on the paper leaving blotches and ruining the fuser.
Printer printing out page full of numbers
This is a driver issue. You may want to try the PCL driver (or use the Xerox Global driver). Download the latest driver for your operating system at
www.xerox.com. Either delete the printer and reinstall, or update the driver. Whichever is easiest for you.
Xerox Phaser 7760 shows the error 004-350, what
You can find answers to your Xerox questions at
www.xerox.com/support .
Solution : Power Off the Printer, Wait 45 Seconds, Then Power On the Printer
Some problems can be resolved by powering the printer OFF and ON.
WARNING: Only use the power switch on the printer to power the printer OFF and ON. Damage may occur to the printer if power is interrupted by other means.
CAUTION: When cycling power on the printer, any incomplete jobs in the queue will be lost and will have to be resent.
- Power OFF the printer using the power switch located on the top, right side of the Control Panel.
- Wait approximately 45 seconds, then power ON the printer.
Not finding what you are looking for?