20 Most Recent Epiphone Joe Pass Emperor II Guitar Electric Hollowbody - Page 5 Questions & Answers

Contact gibson customer service, or check the seymour duncan website. they have tons of schematics.

It was made june of 2010.

that's a 2005 serial number.

made April 2011

Your guitar was made in Korea October c.1960 Production Number: 21040 Check with other models of the period and match

This guitar was made in Korea in July of1996 Production Number: 0009

Your guitar was made in Korea in July 1996 Production Number: 0009

Hum is usually a bad ground, probably caused by a bad plug or jack

try a site like photobucket

For the best answer contact Epiphone directly at http://www.epiphone.com/Home/Talk-2-Us.aspx

The speaker, pots, and transformer will have a date code on them Or contact Epiphone Customer service http://www.epiphone.com/Home/Talk-2-Us.aspx with the serial number.

Contact Epiphone/Gibson customer support at 1-800-444-2766. They should be able to supply a manual.

http://images.epiphone.com.s3.amazonaws.com/Media/Manuals/EpiOwnrsManul.pdf

Here you go. http://images.epiphone.com.s3.amazonaws.com/Media/Manuals/EpiOwnrsManul.pdf

your guitar was made at the saein plant, korea august 1998 production number: 0533

Frankly, if you are unsure how to adjust your truss rod, take it to your nearest guitar repairman. You can cause a lot of harm to your guitar if you do it wrong. Ask the repairman if you can watch what he does so perhaps you will be comfortable trying it yourself the next time.

your guitar was made at the unsung plant, korea february 2002 production number: 0813

Your serial number actually starts with a capital i instead of a number 1. Your guitar was made at the Saein Plant, Korea in May 1999 Production Number: 0857

Either the pot is dirty or needs to be replaced. Either is a simple fix for anyone experienced. Take it to any local guitar shop to get this fixed

Most likely the bidge needs to be setup. Take it to any guitar shop to get it done.