20 Most Recent Microsoft Broadband Networking MN-500 Wireless Base Station (L21-00001) Router Questions & Answers

DriverPack Solution driver update software Download Windows 7 XP 10 8 and...

This means that you have to enter the network key into your computer in order to connect to the network,
If you enter the password as hexadecimal characters, you must type exactly 10 characters (5 bytes) for a 40-bit key (valid characters are 0-9 and a-f), or exactly 26 characters (13 bytes) for a 104-bit key.
If you typed any number of characters other than 10 or 26, or any character that is not a hexadecimal digit, this is interpreted as ascii string.
In this mode, each character is a byte by itself.
So, valid length of the string in this case is either 5 or 13 characters.
If this condition is not met, the string can't be accepted as a valid password.
Please check carefully what you type. (Letter O instead if zero, or small L instead of 1 etc.)

If you don't know the key, you have to connect to the router via a cable and copy the key from there - or ask your Dad to give you the information. He will have it, because he has a working connection.

If you have any more questions or this is not clear ot you, just come back here and leave a comment - I'm happy to help.

Max wireless speed on that router is 11Mbps theoretical. That is an ancient router. Buy a new router N standard You will get the same wired or wireless. N standard with triple band will run at 480Mbps, dual at about 300Mbps and single at 150Mbps.
Comment if you have questions

Just log into your router if you need to know it's IP address. Go to the command prompt type ipconfig /all then look for the Gateway IP address input that into your web browser and then hit enter. Go to the Network Settings page and you will see you SSID and password.

If you can't remember your password reset your router back to it's factory settings by holding the reset button for about 5 seconds. For your model/brand of router the default IP address is 192.168.2.1 The default password is "admin" Once you are connected to your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be your phone number for example 3109876543.

I was facing a similar issue a while ago when I stumbled upon www.ijinni.com. The site was exceptionally well laid out and easy to navigate. All I had to do is, pose my question. The resolution was provided very promptly. They offer some excellent technical guidelines which cover a wide range of topics from installing network drivers to cleaning your mouse JUST FOR $10. So if you are looking for online technical support for any kind of computer related issues with knowledgeable specialists who come up with perfectly acceptable solutions, www.ijinni.com is the right pick.

There are 4 ways to reach them.

1. Once you open the website just click on the live chat where one of the IJINNI technicians will be in touch with you.

2. If you have Skype installed in your machines just add the contact "ijinni.com" (free call).

3. You can email at [email protected]

4. You can dial at +1 512 879 3546.

For any issue you are facing with the computer just call IJINNI

Clean, straightforward and effective!

Hi trilogy1585,

If you want to change the settings on your router all you need to do is to access it by opening a Browser and type 192.168.2.1 on the Address Bar. It will ask you for a password. The Default Password is admin. Password is case sensitive. Refer to the game manual or website for the right settings for your router.

Don't forget to say thanks. Thank you for using Fixya.

Hello

I have a solution for this

Press Ok, Accept or replay so we may get started

My name is Bruce

you might have put in the wrong password or user id check to make sure you have put these in correctly first make sure the caps lock is on/off what ever applies to your user and password id that you provided to your ISP also make sure your routers settings are correct ie:password user name,firewall settings to allow your internet to connect last resort ring your ISP internet sevice provider get them to check your modem for internet access online hope this helps

Hi friend, As you have told me that the router is not powering up, the step that you can try is resetting the router that might be of help in fixing the issue.
Connect the router to the power socket and locate the reset switch on the router, press and hold it for at least 50 seconds and then check if you get any power into it

hello romenick,
reset password,follow instructions

regards,
mastergani

Go to this Microsoft website:

http://support.microsoft.com/default.aspx?scid=kb;en-us;814445

...and read the instructions on this page. You will find a link on this page where you can download MS installation software.

"If you lose your Microsoft Broadband Networking CD and you have to install the software on a new computer, download the contents of the installation CD. To do this, visit the following Microsoft Web site:" http://go.microsoft.com/fwlink/?LinkId=33104 (http://go.microsoft.com/fwlink/?LinkId=33104)

(The first link is useful because it also includes instructions and a link to the firmware updates.)

if it has got any indicators it must atleast blink at first, else it may just need replacement.
dont panic, electronics has a chance to go bad.


Rate this solution and comment to keep in touch.

1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

feed2html.info/www.fixya.com/RSS/NewProblems/Index.../detail.php?...'

1. try to check the status of the connection:
make sure it is connected and the status does not say either of the ff:
a. local only
b. limited or no connectivity
c. limited access only

2. try to change the network name [ssid] and the network key [wep or wpa passphrase]
you can change this by accessing the ipaddress of the router or its user interface

3.try to reconnect to the new network name
and make sure the status says connected.

this is not a browser issue . it is with the connection set up.

Connect your router to computer with ethernet cable then you can acess it with following default link. http://192.168.0.1 or http://192.168.1.1 If you have belkin router then http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Click on wireless settings then WEP Security then not down code .It is your password to connect wi fi.. Then you can connect your wi fi network with that code. Let me know if you need further assistance. Thanks for using FixYa.

Hi... If your running on XP, try theses simple steps:

1. Right-click the wireless icon on the taskbar (lower 2. Left-hand corner near time) and View available networks.

3. Left-click the "change advance settings"

4. A windows should pop up... now go to wireless tab and tick or bullet point "Let windows manage wireless connections"

5. Then click apply. Then try to connect to your wireles router again.

If the wireless tab doesn't appear, the click start and Run then type services.msc then click OK.

Double-click Wireless zero configuration and set it to automatic then press apply and click start to start the service. Then try to do the instructions again.

If you're running on Vista, disable the wireless software provided by your wireless card manufacturer to enable windows to manage wireless networks. Then try to connect to your router again.

Hope it helps!

^_^