20 Most Recent
ION Audio IED11 Sound Session Complete Electronics Drum Set - Page 4 Questions & Answers
I cant get the disc drive to work on my technics
Try formatting a fresh disk in the KN2000. If it doesn't work, something in the drive has gone bad. First thing would be to CAREFULLY clean the heads using 91% isoprophyl alcohol.
10/10/2022 3:14:15 PM •
Music
•
Answered
on Oct 10, 2022
The LCD display on my
I have a PC88MX and there IS a reset for the entire keyboard, however
whatever you may have changed will be reset to factory settings. You must
remember, this is a "hard" reset as al of the parameters on the PC88 are set
to their initial factory state which includes all Setups and Effects.
Just press "ENTER"...the display will as "are you sure"?
9/15/2022 2:43:09 PM •
Music
•
Answered
on Sep 15, 2022
Behringer pmx2000 doesn't turn on
Check the fuse which should be close to the power cord on the back. Check it with an ohms meter or replace with a new one.
8/31/2022 10:57:04 PM •
Music
•
Answered
on Aug 31, 2022
Pedals stopped working.
If electronic trace the cable back to make sure connection is secure. Sometimes there is a button that turns sustain off, check control panel to make sure it is switched on. If piano is acoustic take off front panel beneath pedal board to make sure wooden rod is still connected.
8/26/2022 11:57:38 AM •
Music
•
Answered
on Aug 26, 2022
Korg sg pro x manual
The SG Pro X manual...
Your search is over. contact:
[email protected]
- IAlso, am interested in buying your SG Pro X piano, if reasonable and in good shape.
6/15/2022 10:01:26 PM •
Music
•
Answered
on Jun 15, 2022
Why is there no sound output?
Hi, I am answering this generically, because there are a few things that can cause this on a lot of keyboards.
- Make sure there are no headphones connected. I have removed headphones and the 3.5mm plug comes out leaving the adaptor, this still cuts the speakers.
- Sometimes the switch on the headphone socket does not make properly, work the headphone jack in and out a few times.
- Local MIDI should be set to ON, if you cannot find this, as it is often buried in some deep menu, link MIDI out to MIDI in with a cable.
- Do a reset, be careful as some restore factory defaults and you will lose user presets, so back up, MIDI dump first, others allow resets that do not affect the voices.
- connect to your usual software (sequencer, patch librarian, etc) and see if the keyboard has been muted, volume set to zero etc.
- Is the volume knob turned up?
All the best, Chris the fader.
1/30/2022 8:35:24 PM •
Music
•
Answered
on Jan 30, 2022
Not finding what you are looking for?