20 Most Recent Fender Musical Instruments Corporation PT 100 Chromatic Pedal Tuner - Page 2 Questions & Answers

bring to a music shop fixya doesnt do appraisals

This guitar is from the U.S. Vintage Series made at the Corona Plant (Fender), USA in the Year(s): Cannot be determined from serial number, however you can consult this chart showing the corelation between serial numbers and dates found on the neck Fender MIA RI Serial Number vs. Neck Date (Note the earliest I'm seeing is mid 80s)

The Fender Hot Rod Deluxe has been around since 1996

You have to get the volume pot cleaned and lubricated. If not a quick replacement should do.

It should be possible. In any case, the reverb spring assembly can be removed carefully and unplugged (should have RCA plugs). When mounting the casters, make sure the fasteners don't conflict/block the reverb mountings.

Jon has told you about the serial number. Don't get Fender Fenders confused with Squier Fenders either. Once you know the serial number you should be able to find out the year here http://www.guitardaterproject.org/fender.aspx Then you could try Googling: "reverb.com Fender Jazz Bass (year)" and you will see a range of used prices.

https://forums.fender.com/search.php?search_id=unanswered&sid=d35d4b7008811c1ee81c6792ec0bd755 May want to contact Fender or go on a Fender discussion web site to ask. https://shop.fender.com/en-US/search?q=V154923&qSubmit=

Your guitar was made at the Fullerton or Corona Plant USA sometime in 1984 - 1988, most likely 1985. Fender did not keep good records then.

I think made in China, 1998.

Your guitar is made in Korea 88-96

You can look up on internet I have but can't remember site look up Asian strat or squires or japan strat or fender strat identification or Korean strat indentfication just keep at it you will find tons of info

This is about Fender the guitar brand. You may want to go to the cars section to ask whatever you're asking.

https://support.fender.com/hc/en-us/articles/214344483-Fender-Guitar-Owner-s-Manuals This is where they list fenders info. You may e-mail it directly to [email protected]. If you are unable to create one of these document formats and would be willing to send in your hard copy to the address above, we'd be happy to scan it and return it to you promptly.

The Pre Out and PWR In for a method to insert an effects loop. The output signal from the Pre Out should be line level so you would not connect this to our microphone input on the PA, but preferably to a Line Level input otherwise you would overdrive the PA's input. When you connect the Pre Out, the 1/4" jack may interrupt the signal so you may lose output to the Champion's amplifier/speaker. If this happens, you need to have a return line with the same line level signal plugged into the AMP In to get your sound back on the amplifier itself.

It was made by Cort in Indonesia, in 2005.

You can get it here: https://support.fender.com/hc/en-us/article_attachments/207323343/Passport_500_Pro_manual.pdf

Look for a latch that opens, be careful not to brake the pin. On some models you have to pull the whole preamp unit out, where the battery is located. The easiest way would be to look up the users manual of your specific model. That label should be located in the soundhole or headstock.

I would email Fender. [[email protected]]

The guitar was made at the Corona Plant (Fender), USA in 2005 - 2006. Values have declined disappointingly in recent years. Reverb.com estimates about US$ 500.

Dating Fender Guitars