20 Most Recent Gemini Sound Products GEMINI XGA 2000 2000 WATT AMPLIFIER XGA2000 - Page 10 Questions & Answers

The process if covered right here:http://www.takamineguitars.eu/uk/support/preamp-removal-and-installation/IMHO- the guitar manufacturers are the top of the line when it comes to customer service and online support data.

How are we supposed to know what piano do you have.

This link has a lot of manuals. Try it ManualsLib Makes it easy to find manuals online

Try this site for your manual. I have had luck with it. https://www.manualslib.com/

Here is a helpful video! https://www.youtube.com/watch?v=9irGuV5fwWU If you don't know how to get to global mode, look here: https://www.manualslib.com/manual/90209/Korg-X50.html?page=93

You can use the guide for troubleshooting the YPG-225 provided by ifixit here. There is a section labeled "Keys don't produce sound". If you need the manual for this keyboard, it is here. If those keys which do not produce a sound are somehow hanging (are lower than the other keys) and are somehow slack, the problem is related to broken keys. They need to be replaced. In this case, you can use this guide here on ifixit.

It was produced in South Korea in 2005. https://www.schecterguitars.com/guitars/damien-platinum/damien-platinum-6-fr-satin-black-detail

I am afraid that serial no. does not exist for Straube Pianos! The highest possible no it could be is 65021.

Try this e bay site to order one. http://www.championbrands.com/aera-torquespecs.pdf

OK, first of all try this. 1) Connect the pedal 2) Turn on the PX-5S 3) DO NOT PRESS THE PEDAL WHILE THE KEYBOARD BOOTS. 4) Pedal should function normally If the above procedure does not give you the desired results, then there's a few other things to check before sending it back for repair. 1) Back up all of your stage settings and try a factory reset. If this works, then great. If this does not work then 1) Back up all of your settings, reinstall the latest firmware, then initialize the keyboard with a factory reset. If none of these procedures works, then you have some sort of hardware problem and need to get an RMA to return the unit for repair.

Across the diaphram you should be reading about 8 ohms. it sounds to me like it's blown.However,if you think it'ds thre crossove, take it out and send it to Peavey. They do good , fastwork.............................................................

use the correct power cord or adapter, look online for adapter or power cord. You will need an amp to power speakers.

ManualsLib Makes it easy to find manuals online

One possibility would be to tape some card board over the speaker screens, or if you have technical skills you could replace the external speaker jack with a headphone jack that will disconnect the internal speakers when the headphones are inserted. A variable resister in the speaker circuit would limit the current to the speakers and control the volume.

Not much info to go on here. Maybe you're picking up a ghost signal loop from an amp into a microphone then it repeats. Maybe you can provide more info

There are no particular precautions for moving the organ other than to cover and pad it.

Check Bluebuzzmusic it is a great free source with articles about how to start making music. You can find here https://bluebuzzmusic.com/best-free-vu-meter-plugin-vst/ all info about best DAW for beginners and useful tips. It helped me a lot!

The contact strips under the keys need to be cleaned or replaced.

Please advise which make and model of piano you have you may get an answer.

Request from manufacturer or Google