20 Most Recent Microtek Eyestar U2s Webcam Questions & Answers

This has the same chipset as a Microtek Eyestar U2s and works on Windows Xp.

(XP DETECTS THE CAMERA - EXTRACT THIS FILE TO A FOLDER THEN USE CONTROL PANEL'S DEVICE MANAGER TO 'UPDATE DRIVER' AND POINT IT AT THAT FOLDER.)

If you are satisfied, please rate or/and leave a testimonial. Thanks!

I am sorry, but there is no windows xp driver for this model. You can try the compatibility mode in windows xp but I can't guarantee you that it will definitely work. If you wish to try, download the Windows 98 driver from HERE and follow THESE instructions to install. The instructions may be different but should be more or less similar. I hope you will be able to follow them. Let me know if you need further help.

Good Luck.
Thanks for using FixYa.

well I tell you what it seems like the only supported operating systems are windows 95 and 98 so here is a link you can also download the manual for it.
click here

If it works for you don't forget to rate me
thx

go to this web site to download the driver for your camera.
http://www.camera-drivers.com/companies/675.htm

just install the XP OS.. after go to control panel ang click add hardware..

http://www.driverstock.com/

It will work with Xp you cna go to this site to get the driver. http://www.driverstock.com/ or tothe manufactures web page and download the driver for xp.

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 Be sure the camera is plugged into the USB Port to check it.

As you run the program, write down the info about the camera so you will know what you have .
Double click on this site and download the Camera Diagnostic Tool and run it to check out your camera and/or problem.
http://www.download32.com/webcam-diagnostics-d35065.html

I ran the diagnostic on my camera to give you an idea how well it works.
Give it a try.
Hope this helps. Bud

Try this

This camera drivers are for windows 95/98. Not worth trying to get it to work. Bud

you could try this driver, you will need to create a free account with driversguide to download it.. http://www.camera-drivers.com/companies/675.htm all the best John

Normal 0 Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.

NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

If your new computer is running Windows Vista you have to go and download the Vista drivers for your camera make & model. Hope this helps. Bud

Downloads : Microtek Lab
here is the site just follow the instruction

http://support.microtek.com/downloads/index.phtml

this should be your site for driver download , 2 ways to search by model # or product category , i assume you lost your original disk that has the driver . good luck

Same problem.

a UPS< so is not a computer, gotcha.all UPS #1 failure cause is bad batteries.endless. and often, even in 1 year old.replace them, if still will not chargethe main board inside is bad.http://www.microtek.com/service.php?Type=support