Kodak ESP 9 All-In-One InkJet Printer - Answered Questions & Fixed issues

unplug for 1 min, after reapplying power it may reset itself

So, what happened to you Kodak printer? If you lost it or if it was stoles, guess I can't give you any good advice to recover it except maybe notify police about setrial of the printer and hope they recover it at some moment.

Remove any loose paper in the loading tray. Press the Resume button on the from of the printer. If the paper jam is cleared, move to Ensure the printer carriage can move freely. If not, continue to the next step. Remove lodged paper one sheet at a time, starting in the middle. Check for any remaining bits of paper. If the paper jam is cleared, move to Ensure the printer carriage can move freely. If not, continue to the next section. The best custom research paper writing service to learners across the globe

Most printers have a hard reset method to restore factory settings and go through a diagnostic Power down then while powering up hold the power button while pressing another button (you'll have to look for a hard reset instructions)

It may be that the printhead is partially blocked. I would recommend running a couple of head cleaning cycles from your printer/printer software. If this fails to help there may be a mechanical issue with printhead.Printhead issues are pretty common with this range of printers and Kodak are (generally) pretty good at replacing them.

check the website of your printer such as if its a Lexmark go to lexmark.com and see if the model number is compatable with the Vista programming. A lot of printers do not operate with Vista. I have three printers that only operate with XP and Windows 7

if you are printing trough a PC or laptop make sure that there are lots of resources by freeing up some ram or closing unwanted programs running on the background, you can press ctrl, alt , del and go to task manager and see if there are unwanted process running on the pc.

Error Printer error 3806 3807 3808 3809 3810 or 3811 Kodak does not say what the error is but they do show how to deal with it.

hi Here is the link for a Kodak ESP 3 printer firmware download, Windows OS. http://support.en.kodak.com/app/answers/... Here is the link for a Kodak ESP 3.2 printer firmware download, Windows OS. http://support.en.kodak.com/app/answers/... Here is the link for a Kodak ESP 3.2s printer firmware download, Windows OS. http://support.en.kodak.com/app/answers/...

If the software and label haven't changed then there is a defect in the printer.

You may choose PCB assembly what you want on https://www.raypcb.com/

HOLA, ME PODRAS DECIR COMO HICISTE PARA DESMONTAR EL SCANNER DE LA IMPRESORA? MUCHAS GRACIAS

Dab the cartridges on a tissue and see if the image comes out solid, ink I mean. By doing this you can rule out the cartridge. Don't assume that fresh cartridges are okay. I have been in the printer business for years and seen many cartridges that are defective from the shelf.

Jill, try the attached link, if no answer there contact Kodak support. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." http://resources.kodak.com/support/shtml/en/manuals/urg01238/urg01238c11s1.shtml Search How To Repair Any Kodak Printer

To help you assist with cleaning printer head for Kodak printer and copier, please follow the steps mention below: -Press 'Home' on the printer control panel. -Press the down arrow button until 'Maintenance' is selected, then press 'OK'. -Press the down arrow until 'Clean Print head' is selected, then press 'OK'. To help you further, you can refer the link given below: http://support.en.kodak.com/app/answers/detail/a_id/1459/~/cleaning-printhead-on-all-in-one-printer/selected/true GuruAid.com

some ink carts are blocked, clogged

Happens to me a lot I keep removing and replacing them 1 at a time until the message goes away.

Hello Gordon, On your computer, click the Windows Button, Select 'Control Panel. A window appears 'Program' on the left hand side, below it you will find 'Uninstall A program'. When you click the 'Unistall' a list of all the programs appear in a window. Select the program you wish to uninstall, it is only then the 'UNINSTALL' button next to the 'Organize' button. The computer will ask you to confirm the 'Uninstall' option. Hope this helps.

Search inside for anything that should not be there. I found a paper clip, chewing gum wrapper, dust build up, bits of paper, a christmas ornament, all sorts of things can do this. Sometimes very small things. Use a can of compressed air to clean it put well. Hope this helps.

1)It won't print for the way it's programmed. 2) buy cartridges$$$$