Polaroid SprintScan 4000 Film Scanner - Answered Questions & Fixed issues

Hello Gaspare, hi, looks to me you have power supply problems, the initialization process failed due to a short or a bad part on the main board, this bad part was detected on initialization. The bad part could be a shorted transistor or a bad lamp or relay or the failure of the entire main board. Now the question is do we have parts available for repairs. I suggest you visit your Polaroid store for proper service.

yes please try at www.p-ips.eu

kindly chage the data cable of scanner and port also.

[email protected]

The scanner uses a "twain" driver, try searching for that, it may be one of the files you already downloaded. Just look in the download u got.Also try going to add hardware, select the scanner there and poit it to the downloaded file when uit asks if you have a disk that came with it. Download the drivers to your desktop, rt click and open a folder on the desktop, and drag all of the drivers and the Twain one especially, into the folder.

paul here i am, what happened, you suddenly ended our session, do you still have the script? we can continue it there if you want. just watch out for my reply.

Download your manual HERE

Try to reinstall the software.

Hi, Please unplug the device until it turns off. We should also ensure that it's not overheating and then leading to the error that you've just described. If the error occurs again, please ensure that card /id is loaded in the correct orientation and the machine isn't lacking any ink. Otherwise, you might need to return the device to factory defaults. Thank you.

Sorry, no longer compatible due to age.

Hello my Polaroid tower won’t come on when it’s plugged in. Please help

https://polaroid-pogo-app.en.softonic.com/android

one at a time will be ok nothing with staples or metal should be shredded in the machine

There is no such external reset buttons to modern TVs. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

If you have taken a photo and the light is flashing red, you may have a paper jam. Possible reasons why there is a jam could be: more than ten sheets of paper, bent paper, and backwards paper. To fix the jam, remove the paper carefully without damaging the camera and insert new sheets making sure they are oriented correctly and do not exceed more than ten sheets. Also, make sure you are using good quality paper.

Hi. I think there are two people around the world that have a Lumia 800 AND a Pogo (including myself). The windows Phone 7.5 doesn't support the BlueTooth Object Push Profile (OPP) Standard. But the Windows Phone 7.8 does (I have installed and it works)

try to reset with factory mode.

check drum inside cartridge

Phone 1-800-312-2615

Well the default PIN code for pairing your polaroid PoGo printer via Bluetooth is 6000.
Hope that helps. please let me know if you need further assistance
thanks for using fixya