Top 20 Transcend (589307) Media Questions & Answers

I had the same problem with Windows 10. Go to manufacture on your computer for SD card and reinstall the drivers..it should work fine..remember whenever dealing with Windows you may have to reinstall drivers...

hi there. this is what i have just found on the internet it might help you out but not sure. After plugging in the device. Go to device manager (In run type "devmgmt.msc") In Device manager go to "Universal serial bus controllers" It should list the storage devices that you have connected to your PC. Right click and then click "Uninstall. Remove the USB drive and restart your system. Try connecting the device again, I think this should solve the problem. for windows xp first you need to go to Device Manager by double-clicking on the System icon in Control Panel, choosing the Hardware tab, and clicking Device Manager. go to divice manager usb hub controler it will be at last of the list then right click on usb hub controler open it go to usb root hub right click & go to properties then go to device and click ok do it 4 to 5 time it will work 100% i have tried it and it worked Best of luck :) hi do one thing go to my computer right device manager ther u to o universal serial bus right click on tht option go to update driver select yes this time only give automatic k . before doing this step plz insert mother board driver cd after tht u do all this procedure thn c ur pendriv vl be dedected k if none of the above works try this link out. Kingston DT 1000 pendrive was not detected in computer Google Search

Do not use any more and get some data recovery freeware.

Are any of your devices (TV, PC) Apple ? I\'ll assume not, and describe the procedure for Windows (XP)First, has the pen drive any files on it (for example film clips which can watch on your TV ? Are these valuable (you do not wish to lose) ? If the answer is \'no\', then you can try these two steps (for windows XP):Your pen drive works in your TV, but not in your computer. This suggests that maybe it is conflict of formats used by your TV and your computer. Consult your TV user guide to find which formats it is able to use. If your computer is a windows computer, it will most likely need disks (pen drives) formatted as FAT32 or NTFS. If eiher of these are mentioned in TV \'s user guide, that is good. 1. Left click on the windows start button at the bottom left of screen (a kind of flag symbol). Right click on \'My Computer\' or \'Computer\'. A drop-down menu will appear, from which you should select \'Manage\' by left clicking. A new window will open: some in this window will be an icon with the words DiskManagement by it. Double click or single, can\'t remember and yet another window will open, with information about all your disks, including your memory stick. Somewhere on this screen against that disk (which might be reported as \'Disk 1\' in the lower box) it should give the format. This should be either FAT32 or NTFS. It may be RAW or not recognized. If it says exFAT I fear there is no easy way to proceed, and you stop. (this might be a problem if your PC is running Windows XP, but not if it uses Windows 7 or 8). In any case you can right click in lower right box against the pen drive entry (NOT YOUR SYSTEM DISK !!) which bring up a drop down menu which should contain an option for formatting. Formatting will ERASE ALL DATA ON THE DRIVE BEING FORMATTED so choose the correct one. If given the option you should choose FAT32 and Full format (not quick format). Leave all the settings as default values, and proceed. This mat not work, in which case ....shut the DiskManagement Window etc. and2. Click on the Start button again, and select All Programs, and from that Accessories, and from that command prompt (the symbol being a small black square). A new window with a black background will open with an ">" prompt . You will have remembered the letter assigned to the pen drive, from either the Windows file explorer of DiskManagement. Type "FORMAT XXX: /fs:FAT32" and press return: the disk will be formatted. XXX is the letter assigned to the pen drive, which might be G or H for example. Ensure you get the correct one, if you are unsure do not proceed. Formatting a disk will result in all data on that disk (including a pen drive, and a harddisk) being lost. If successful this may take some time. Even if unsuccessful, it may take some time. In the latter case, I may have further suggestions to help. Please report back.11.June.2014

Put a piece of tape over the disk so it covers the holes on both sides. This would be the small rectangular hole where the tab is broken. Use thin tape (like Scotch brand) and wrap on both sides and you should be OK. The disk should be readable either way though as the tab makes the disk read-only.

your pen drive has bad sectors.Try repairing it by typing chkdsk x: /f /r (where x is the pen drive) at the command prompt

To remove write protection: Open Start Menu >> Run, type regedit and press Enter. This will open the registry editor. Navigate to the following path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies Double click the key WriteProtect in the right pane and set the value to 0 In the Data Value Box, press OK Exit Registry, restart your computer and then re-connect your USB memory card to your computer.

please visit here http://www.transcend-info.com/products/online_recovery_2.asp?dw=1

To remove write protection: Open Start Menu >> Run, type regedit and press Enter. This will open the registry editor. Navigate to the following path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies Double click the key WriteProtect in the right pane and set the value to 0 In the Data Value Box, press OK Exit Registry, restart your computer and then re-connect your memory card to your computer.

Solution one

• Go to file manager on your mobile
• In Settings choose system folders,
• In the System folder, find a file called mmcstore
• Send the file to your PC using IR/Bluetooth
• Open the file in Notepad
• The password you need for your memory card is located within that file

Solution two 1. Insert your card into your phone, without accessing it through the phone 2. Run FExplorer and Open the path C:\system 3. Find the file called mmcstore, and rename it mmcstore.txt 4. Copy that file (mmcstore.txt) to your PC and open it in Notepad 5. Your password will be located within that file.

You have to be the computers administrator to change any values on any hard drive on your computer click start control panel user accounts on the users tab click the name of the computer administrator you must have full control click start click to open on my computer you should see your usb drive could be E: or something right click select properties there will be an array of options select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7 click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP click start right click on my computer select open Right click the icon of your usb drive (It should be E:/ or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. if you need more help with this post a reply Hope this helps.

It's probably bad if you can't even format it. Replace. They cost about $5

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems to a computer and its parts hope it helps

reformat your usb it is infected by the viruses.

Try formatting the card and be sure the locking switch is in the off position.

SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

This is what you need to do:

What is not the problem, is the position of the switch entirely. With the SD card Face up and the tiny white plastic switch on the left side, should be slid toward the card edge connector (the shortest side). I know you may have done this and it still doesn't work. Here's why, On the opposite side of the SD card from the switch, there is a tiny "Notch" cut out.

Place a piece of tape, masking, electrical, sometimes transparent will work. Be very precise in placing the tape over the notch, but not over the brass connector on the opposite side. Then place it in your card reader, format it, read and write files to your desire.

This is a little known issue with the design of all SD cards. The notch forces them to work in camera's, MP3 Players, PDA's, etc. that are portable devices, but not in USB card readers or computers with SD reader slots.

The card reader with the SD card has this extra built in feature to protect copyrights (for some reason on blank cards), and makes it useless for custom applications. Once you have "Unprotected" the SD card, installed your files, then remove the tape.

If you get the same error again after applying the tape, add a second layer. Double check that you did not cover the connection edge, and the plastic tab is closet to the side you insert in the device you are using.

Sometimes it takes several tries, but it will work with patience. If you have existing files on the SD card, insert it, right click, select properties. Then remove the "Read Only" check by the box and try to delete or add files then. If it says Disk Write Protected, then check the tape again.

It's annoying, but it will work with patience to bypass this design flaw.


Good luck!!
EJ Kudelka

Do computer response your flashdrive? Do you see it in you Windows? Maybe is it lock?

First
Write Protection on any portable USB Device can be applied by the physical lock provided on the card adjuster or some times provided on the pen drives, so make sure to make your drive not write protected by moving the lock in right direction.
But even after moving the physical lock for write protection the problem can happen due to some virus action. This happens when some virus or script which applies the registry hack to make any drive write protect when connected to the computer, In that case follow the procedure below to remove write protection from your pen drive.
1. Open Start Menu >> Run, type regedit and press Enter, this will open the registry editor.
2. Navigate to the following path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

Note: If the registry key StorageDevicePolicies key does not exist, you will need to create it

Download this batch file called add.bat from here, and double click after download the key will be automatically added to registry.

3. Double click the key WriteProtect in the right pane and set the value to 0 in the Value Data Box and press OK button

4. Exit Registry, restart your computer and then again re-connect your USB pen drive on your computer. That is it, done.

However if that does not solve your problem try this
Think this write protection error is due to some virus.
Steps to remove write protection for Transcend users
1) Go to download center of the transcend,here is the link
http://www.transcendusa.com/Support/DLCenter
Type the model no. or part of model number you are looking for.
example: JFV30(all alphabets in Caps )
2) Choose other details like product type etc. and search for your product
3)Then select the product which which is most similar to yours from search results
4)Then download the mFormat utility. You will asked for serial no. if you dont have..enter this no. 1456784523
5) Connect your pen drive
6) run the mformat utility and select full format after full format your write protection will be removed. try twice or thrice if you can't correct at first time.
Thats all...

It is possible that the memory was damaged or is infected with a strong virus malware that does a block on detection to the PC. try the same on another PC which has a good protection and if this works there are faults on your port or the PC is infected.
If the drive is still not detected then the memory is faulty even after you try to format on any PC.