20 Most Recent
GE Caddx NX-1192E - NetworX LCD 192-Zone Keypad - Page 3 Questions & Answers
Our keypad for our alarm will not stop beeping.
Your alarm system has two power sources, a power transformer that is plugged into an electrical outlet and a backup battery that is located within the control panel box. If the battery is over five years old you will need to replace it. Open the box and you you will see the battery with a set of wires attached to it. Pull the wires off of the battery and take it to a local battery warehouse supply store. They will match it up with a new one. Plug the new battery into the system and your system should restore itself back to normal.
How do I get GE
Hi, these are usually available in a service manual, these may be obtained from the 'net, or by a direct approach to the manufacturer.
Use the exact make and model and the words service manual when doing a Goggle search. or make direct contact to he manufacturer.
I have GE NX-6 with
hi,
You have to check the fuse inside the system . If there is any power surge happened then there is a chance for fuse become faulty. As you mentioned it would be a power side problem. first of check the fuse inside the system. Also you have to check the 16.5V transformer which provides the working voltage to the sysatem when it is line. If need any more assistance from me then you can contact me through fixya. One more thing is if can add any picture of the cotrol panel circut board then it will be very helpfull.
ok
Adt wants 500+ dollars to repair phone
Communication failure will clear itself once your phone lines are restored. Try arming your system and opening a door to set the alarm off, a forced signal will usually clear a communication failure. As far as parts, you can get them pretty cheaply from a local Alarm Company or dealer. Give them a call, most local, small dealers are fair and helpful. Easy to install yourself as well.
Not finding what you are looking for?
