20 Most Recent MSI LGA 775 Intel G41 1 PCIEx16/1 PCIEx1/1 PCI Micro-ATX Motherboard G41M-P26 - Page 5 Questions & Answers

Might seem funny but run Makwarebytes in safe mode it may be a virus type causing problem

The orange light is okay. It is just telling you that the other end of the cable is connected to a device that is powered up. The light will turn green once the LAN driver are loaded. The display not working can be any number of problems. Make sure that the cable is plugged into the right port...some systems have more than one and since only one can be active at a time if the video is plugged into the inactive one you get a blank screen. Second, make sure the screen is working. Usually if you turn it off and then back on it will display the logo of the manufacturer or something about "no signal." Most displays also have a light telling you they are on or off. Make sure it's lit up. Now, if the display works and displays the logo when you turn it on or at least a message saying "no signal" AND if you have the cable from the video to the system connected to the right place, but you still get no video, then the problem is in the system. To test this we usually open the system and remove everything that can be removed because it is absolutely not needed to get the system started. We disconnect the hard drive and optical drives. We disconnect any devices, including keyboard and mouse, And we remove as many expansion cards (the ones in the pci or pciExpress slots) until we get the system stripped down to it's core. The core of the system includes the power supply, the mainboard, the cpu, one ram module and the video components....onboard if it has onboard video (which I believe it does if my memory serves me), but a video card if it does not. Once we are at the core we test. If it works we begin to add one thing at at time, testing as we go, until we find the bad part. If it does not come on we re-seat everything and switch to a second RAM module. Once we have re-seated the CPU and RAM, if the thing still does not work we remove the CMOS battery for five minutes, put it back and try again. If at that point, having tested about everything you can test, if it still doesn't come up, if we have a spare CPU we change that. If that too fails to fix the problem we consider the mainboard DOA. Hope this helps.

Have you updated the drivers for your wifi-card?There is two places you can goOne is the Msi website the other is the wi-fi card manufacturers website.It could also possibly be the driver for the FN keys thats need to be either re-installed or updated

75 to 150 USD on Ebay

please go here for your motherboard manual Support For 785GTM E45 MSI Canada Motherboard The world leader in... your motherboard model number is 785gtm thank you

I found how to fix it, rather easy to be fair. If you are upgrading the bios and then the EC, make sure that you are getting the right one. Go there for the EC ; https://www.msi.com/Laptop/support/GT70-2OC.html#down-firmware&Win8.1 . To know what version to use, DL the MSI Help desk. Then after flashing the new EC, the key point is to shut down the PC, remove the battery and power cord, press 15 sec on the start button, so the EC memory will erase. Re plug all and restart, everything should work now.

Try a reboot.

switch the computer on hold down alt and delete together and the computer opens on the bios page