20 Most Recent Sanyo VPC-X1400 Digital Camera Questions & Answers

0helpful
1answer

Camera will not be recognized by any computer

Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa ( http://picasa.google.com ).
9/15/2013 11:39:55 PM • Sanyo VPC-X1400... • Answered on Sep 15, 2013
0helpful
1answer

Connect computer removable

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files.
9/4/2013 6:35:29 PM • Sanyo VPC-X1400... • Answered on Sep 04, 2013
0helpful
1answer

Connect computer removable

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa ( http://picasa.google.com ).
9/4/2013 6:34:53 PM • Sanyo VPC-X1400... • Answered on Sep 04, 2013
0helpful
1answer

How to upload pictures

The best way to transfer pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.
11/15/2012 7:32:46 PM • Sanyo VPC-X1400... • Answered on Nov 15, 2012
0helpful
1answer

Need manual instuction to down load pictures to computer

You may download a copy of the manual from here.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.
10/24/2012 10:01:18 PM • Sanyo VPC-X1400... • Answered on Oct 24, 2012
0helpful
1answer

Battery charger for sayno vpx-1400

Here's one source for a replacement battery charger.
6/20/2012 9:53:04 PM • Sanyo VPC-X1400... • Answered on Jun 20, 2012
0helpful
1answer

Inside of the lens is dirty

Cleaning internally is not a simple job, it requires special tools and as the camera lens has hundreds of small parts is not a job that can really be done.
3/6/2012 10:34:55 AM • Sanyo VPC-X1400... • Answered on Mar 06, 2012
0helpful
1answer

My camera(sanyo x1400) wont turn

Hello

Thank you for using FIXYA!!!

This is a suggestion. If you do not feel comfortable trying it, you will need to take the unit to your nearest service centre. Feel free to let me know if you need any assistance.

The problem might be that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea
8/15/2011 12:50:15 PM • Sanyo VPC-X1400... • Answered on Aug 15, 2011
0helpful
1answer

When I try to turn

Fixing a Lens Error on a Digital Camera


This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous interiors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particles that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

8/13/2011 8:22:32 PM • Sanyo VPC-X1400... • Answered on Aug 13, 2011
0helpful
1answer

Hello, I would like to

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Thanks for using FixYa.
8/9/2011 4:51:24 PM • Sanyo VPC-X1400... • Answered on Aug 09, 2011
0helpful
2answers

Will not charge

replace batteries with new ones
7/17/2011 10:25:22 PM • Sanyo VPC-X1400... • Answered on Jul 17, 2011
0helpful
1answer

I need a manual in English for my digital camera

I suggtes visit this link to download: manuals/cameras/VPC-X1420_im (pdf)

Hope this helps (remember to rate this answer).
6/15/2011 9:18:53 PM • Sanyo VPC-X1400... • Answered on Jun 15, 2011
0helpful
1answer

Is there not a way to connect my camera with my

Hi,

Here is a tip that I wrote about how to find the manuals, drivers, downloads andsupport for Digital Cameras.

DigitalCamera Manuals, Drivers, Downloads, and Support How to easilydownload Pictures from Digital Camera
heatman101
5/2/2011 4:45:54 PM • Sanyo VPC-X1400... • Answered on May 02, 2011
0helpful
1answer

My x1400 reads system error when i turn it on. It

Hi,

Checkout this tip about digital camera error messages


Lens Errorfix for Digital Camera

heatman101
4/30/2011 8:38:33 PM • Sanyo VPC-X1400... • Answered on Apr 30, 2011
0helpful
2answers

Deleted photos

No worries, it is possible to recover deleted photos from camera. You may take a look at this guideHow to recover deleted photos from digital camerathe guide helped me before, easy to follow and helped me get back all my photos from my digital camera, hope that it helped you too!
3/13/2017 10:00:59 AM • Sanyo VPC... • Answered on Mar 13, 2017
0helpful
1answer

The zoom on my sanyo vpc E2100 won't work at all, either in standard zoom mode or intelligent. it would work sometimes, at first. can this be fixed and would it cost very much?

From your description, it appears that the camera may have received an accidental blow, or else there is some foreign matter (sand or suchlike) in the lens mechanism. Either way, you are probably looking at professional repairs, which will be expensive, possibly prohibitively so. It may be more financially viable to replace your equipment. If you can show accidental damage has occurred, then you may be able to claim on your household insurance.
6/19/2016 10:58:26 AM • Sanyo VPC... • Answered on Jun 19, 2016
0answers

Lens error 1215

Be the first to answer 9/19/2014 2:37:29 PM • Sanyo VPC... • Posted on Sep 19, 2014Be the first to answer
Not finding what you are looking for?
Sanyo VPC-X1400 Digital Camera Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Sanyo Cameras Experts

Cindy Wells

Level 3 Expert

6688 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Ngoro

Level 3 Expert

3523 Answers

Are you a Sanyo Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

VPC Sanyo

  • VPC Sanyo

Most Popular Question

camera will not recognized any computer

  • Cameras
Loading...