Answershttps://www.answers.com > Auto > Auto Parts
Oct 26, 2022 - Press the AS button and hold depressed while turning the radio on. (after 3 secs you should hear a beep. Release the AS button. The display ...
..
If this is with an analogue signal; FM/AM, check the aerial amplifier is working properly. Sometimes the rear windscreen heater is used as the aerial with an RF amplifier in series with the aerial lead.
No power means no/poor signal.
Factory radios are connected to the Body Control Module computer and are monitored and run by it. Things like warning chimes and indicator clickers are instigated from the BCM and sent via the audio system. You replace the radio with something the BCM doesn't understand and funny things happen. An auto-electrician or a radio / alarm outlet might be able to reprogram the BCM to ignore the new audio device.
Put the old radio back in and it will be fine.
..
Let's tackle the orange and white wires from your Ferris harness.
Orange Wire: The orange wire is typically the charging system wire. It connects to the alternator or stator coil to charge the battery while the engine is running. You'll want to connect this wire to the corresponding terminal on your new Predator 708cc engine. Refer to the engine's manual for specific details on where to attach it.
White Wire: The white wire is often the kill switch wire. When you turn the ignition key to the "off" position, it grounds this wire, effectively shutting down the engine. Connect the white wire to the appropriate terminal on your new engine. Again, consult the engine's manual for precise instructions.
Remember to follow safety precautions and double-check your connections before starting the engine. If you need more detailed guidance, consider referring to online resources or seeking professional assistance.
Predator 708cc V-Twin Wiring How-To (youtube.com)
PREDATOR ENGINES 62879 OWNER'S MANUAL Pdf Download ' ManualsLib
62879.pdf (harborfreight.com)
Not using the UPS for a long time will cause the battery to not be charged at the moment Hajir Sanat's suggestion and advice to you dear ones is that if you don't want to use the UPS for a long time, you should fully charge it every three months. Another reason for the UPS not charging is that the charger is damaged Replacing the battery can solve your problem if your UPS is 3-4 years old.
Hallo! It very easy. I bought some parts (probably $5) and made adapter. Everything work perfect. Good luck! If you have some question please write on email: [email protected]