20 Most Recent Audiovox BA100 Car Subwoofer Questions & Answers

Actually. I don't think you have to wire a remote switch from the radio to the amp on this product. This powered subwoofer supposedly has automatic signal sensing turn-on circuitry. I have the same problem. So I think I'll try to just hook up the power (to the battery), ground and the + / - speaker wires to one of the back speakers in the car and see if that works.

If I understand you right, you should be running a single wire to the amp in addition to the RCA's

The Audiovox AMP777 is a 4-channel power amplifier, and the input wires will depend on the audio source you are using. Typically, the amplifier will have RCA input jacks for left and right channels, and you would use RCA cables to connect the audio source to the amplifier. Some amplifiers also have a high-level input option, which would allow you to connect speaker wires directly to the amplifier's input terminals. However, it's always best to consult the user manual or contact Audiovox support for specific wiring instructions for your amplifier model.

Line out into the vehicle radio unit. https://www.voxxelectronics.com/docs/common/AVXMTG10UA/AVXMTG10UA_IM.pdf https://www.google.com/search?q=Audiovox+MTG+DVD+Video ..

Request the diagram from Audiovox.

Try 054321

Eqs are terrible...use head unit for tweaking sound...

Using the wiring colors check the head unit output with a test speaker.

Quite common problem. Repair it or replace your player if repair cost is too high. Personally, I stopped using CD players time ago: I use a mp3 player.