Top 20
GE GTD120 System Questions & Answers
I trying to hook up
What you have hooked up(y,pb,pr) is component video which carries the video. The sound is trnasmitted through a different cable, RCA(white and red) probably in your case. You need to make sure taht your component connections are in all the way and are making contact and, taht all three are in the correct inputs on the flat screen. It is easy to confuse the colors and all the connections are close together making it easy to make a mistake, I've done it myself. Once you have established your connections are correct, make sure you go through your TV's menu to make sure you are the right menu screen(TV,DVD, etc.)
Forgot the parental code how do we reset
Hello
Just unlock its Parential contol and reset the TV. NB: You must have its original remote control handset to proceed. If you haven't it with you, just boroww it from somone you know, who have the same model number of Tv; just to unlock it. After unlock, you can use universal remote or so.Proceedings are:
Most GE TV sets use a four digit code to control the v-chip. The code reset procedure is different depending on the model. Try each method until you find one that works:
- Hold down MENU on the remote and VOLUME DOWN on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
- Hold down the 0 on the remote and the VOLUME DOWN buttons on the TV its self at the same time for at least 4 seconds. The set won
I have had a GE
In the system there is a reading eye.Which reads the discs which you insert.This eye is called "lens".If this lens gets weak or dusty then it will not read the disc .As a result it will stop the disc in between and freeze or vice versa.In this case the lens needs to be cleaned and checked.For that the dvd unit needs to be disassembled and checked.But if lens is clean inside then its a weak lens issue ,its by age of the unit.In that case it has to be replaced.
Thanks. Keep updated for any more query. You can rate this
solution and show your appreciation.
Dvd door will not open
My only suggestion is to press and hold the eject button for a period of time (15-30 seconds).
I got a new sony high Def TV Hooked it up and now
Return it to the store. Once set, you cannot reset the region unless you search far and wide for the hack to reset. The hack usually requires you to push a series of buttons on the front panel to pick new region.
We have a model GTD120
Have you tried using your remote to switch audio tracks while it plays? I'm pretty sure all players allow this and then you can select among any of the available tracks on the disc. If there is only one track then make sure this used DVD is not a bootleg.turn it off with the Audio on the Remote Control.
----------------------------Unfortunately, you can't turn off the commentary with the remote control and it's somewhat awkward to go into the Bonus menus to find the area to turn off the commentary. There is also a choice of commentary or no commentary with the deleted scenes. So, if you turn on the commentary during the movie and then look at the deleted scenes, you have to turn the commentary off if you don't want to have commentary during the deleted scenes and.....it becomes very confusing,you have the choice of commentary or no commentary while you're watching the scenes, but make sure you choose wisely because you can't switch from commentary to dialogue in the middle of a scene.
----- this will help.
---------
thanks.please keep
updated.please do rate the solution if helped.thank you for using fixya.
5.1 Surround Sound Cutting Out
HI,
Yes you are right man, this problem occurs only with the cable problem, i can explain you, if there is a receiver problem means you won't get the sound its dam sure,
only if there is a cable problem you will get some noise or sound cut off with the speakers, so you please check the cables properly it will be alright.
DVD Door does not open
disconnect the ge and open it remove push tray open and you will see a broken rubber band just replace and good as new
DVD
its going to need to repaired, there is a short on the circuit board.
Not finding what you are looking for?
