20 Most Recent Jensen JER-323 Remote Control Questions & Answers

NECESITO EL CODIGO PARA MI CONTROL REMOTO JENSEN JER323 PARA UNA TV SONY

0092,0097,0099,038,039,033 are the codes to check with Memorex brand TVs. If you wish to get more, check these sites. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

Sony remote has no setup codes for this TV

Hello
Check out with these codes.
0093 & 0688
OK.

Hi,

Configuring codes:

1. Turn on the component that you want to set up.
2. Hold the component key down until the green indicator light comes on. The green light should come on after approximately 3 seconds.
3. Release the component key.
4. If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.
5. Within thirty seconds, enter in a 4-digit code number. The component key lights will blink with an upward motion when a code has been successfully entered. In this case proceed to step #5. If the code has not been successfully entered, the componment lights will not blink. In this case return to strep #1 and start over.
6. Test code by pressing "Power" key. If the component turns off, you've got the right code. Follow the same instructions to set up your other components. If the component doesn't turn off, return to step 2 and use the next 4-digit code listed.

Note: If none of the codes turn your component off, try the Auto Code Scan function.

Auto Code Scan:

The Auto Code Scan feature allows you to set up your components without having to enter in code numbers. The Jensen will do the work for you! (It may take a few minutes to find your code using this method.)

1. Turn on the component that you want to set up.
2. Hold the component key down until the light comes on. The green light should come on after approximately 3 seconds.
3. Release the component key.
4. If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.
5. Press "0" - "9" The green light will blink as codes are sent.
6. As soon as the remote turns your component off, press the "action" key. (You have 1 second in which to press the "action" key to save the code.) The component key lights will blink with an upward motion when a code has been successfully entered. The component is now programmed. To find that code, proceed to Code Readback.
7. If none of the codes turn your component off, return to step 2 and start over. Thank You

Hi,

Configuring codes:
Turn on the component that you want to set up.

1.Hold the component key down until the green indicator light comes on. The green light should come on after approximately 3 seconds.

2.Release the component key.

3.If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.

4.Within thirty seconds, enter in a 4-digit code number. The component key lights will blink with an upward motion when a code has been successfully entered. In this case proceed to step #5. If the code has not been successfully entered, the componment lights will not blink. In this case return to strep #1 and start over.

5.Test code by pressing "Power" key. If the component turns off, you've got the right code. Follow the same instructions to set up your other components. If the component doesn't turn off, return to step 2 and use the next 4-digit code listed.


Auto Code Scan:
The Auto Code Scan feature allows you to set up your components without having to enter in code numbers. The Jensen will do the work for you!

1.Turn on the component that you want to set up.

2.Hold the component key down until the light comes on. The green light should come on after approximately 3 seconds.

3.Release the component key.

4.If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.

5.Press "0" - "9" The green light will blink as codes are sent.

6.As soon as the remote turns your component off, press the "action" key. The component key lights will blink with an upward motion when a code has been successfully entered. The component is now programmed.

7.If none of the codes turn your component off, return to step 2 and start over.

Thanx

I would go to manufacturer''s web site .Codes should be obtainable there

http://www.xdiv.com/remotes/

Try: 003, 054, 055, 062, 070, 148, 170, 171. GoodLuck!

fogot how to set up my remote , got codes. trying to set up Bell Express Receiver

remotefinder.rca.com just found mine!!!!

go to www.jensen.com and download the codes is free.

Hi I am Vortash the manual you require can be downloaded from this site http://www.safemanuals.com
Hope this is of help Regards Vortash

Sorry but to my understanding there are no universal remote codes in existence for combos. Call an electronics repair shop. Give them the make and model number of your combo. They will be able to order you a new remote for your brand and model. If it is not too old they should be able to get one for you. I got one and it was only $21.00. Well worth it cannot use half of the features without proper remote... Good Luck!

Hi I am Vortash you can get your manual from here sometimes they are free http://www.safemanuals.com I hope this helps Regards Vortash