Top 20 TP-LINK TD-W8901G Router - Page 4 Questions & Answers

create a password.

Only if each wifi card is connected to a different network. Now if you're talking about two wifi cards in one computer, you may run into interference with the signal. Computers will usually default to one connection anyway. Interesting though.

The pin code should be printed on the router itself. Each one is different.

Reset it with the pin hole on the back or the bottom. Everything will change to factory defaults.

contact you internet provider.

yes. System Requirements OS: Windows 7(32/64bits), Windows Vista(32/64bits), Windows XP(32/64bits) http://www.newegg.com/Product/Product.aspx?Item=N82E16833704135

The model may not be able to do that. Some router allow a blacklist of 20-30 web sites. There is usually a way around though. Look carefully at the setup menus and if supported it should be obvious.

Try resetting it, see this... http://setuprouter.com/networking/how-to-reset-your-router/ , then try the default Username & password... http://setuprouter.com/router/tp-link/passwords.htm

Read the instructions manual and have your ISP crednetial ready. 192.168.0.1 of router address to access via your browser. The only way to set it up is to follow the manual instructions, without a ISP usereame and password you will not be able to connect to anything.

the security key is on the label, usually located on the back or botto

LOST ROUTER LOGIN PASSWORD If you have forgotten your personal router login password there is no way to recover it. You will have to reset the router. This means all the settings on the router will be reset to factory defaults. It also means that all your connected devices will need to be connected again with the new security information (WEP, WAP, etc,) . You will need the default admin login name and the default admin password. This can be found in the user guide that came with the router. This can usual be found online at the router manufacturers site. There is usually a button or a switch hidden in a pinhole opening on the back of the router. Pressing and holding the switch for 10 seconds or so will cause the reset and usually the LEDs will flash and blink for several seconds as the router firmware sestets and clears out the old information. If you are trying to get into someone else's router illegally there is no way to find out their login password. For future reference, write the password down, or a hint at what the password is, on a piece of tape and secure it on the bottom of the router. I use my cell phone memo function to store all my passwords.

This error is related to internet connectivity. BEST FIX DNS PROBE FINISHED NO INTERNET

Try pushing the button for 10 seconds or more, because 5 seconds would be for wps or emergency firmware reload(like for a corrupted firmware).

Hello ! If you want to see your wireless network SSID ,go to router by typing 192.168.0.1 or 192.168.1.1 .Go to wireless >security>there you can see you router's SSID . Hope this help.

The login and password is admin.

You will have to access your router's security section it goes by different names for different routers. In there you find an option to block or filter the specific website url or address. Provide the brand name of your router for more detailed help. Ceers HoT.

on windows this should look like the above image so what your option are, to remove the driver than let the xystem search automatically for any necessary driver start online e search mode first

first, try to use your BSNL troubleshooting guide for check your cable, signal to Noise Ratio, Attenuation Value, Maximum Transmission Unit and always use ADSL Splitter and more factor by http://www.bsnl.co.in/opencms/bsnl/BSNL/services/landline/helpdesk.html and if again this problem arise than set up your modem or router http://www.techsupportrouter.com/

ASK YOUR NEIGHBOUR FOR PERMISSION,PLEASE DONT COME TO THIS FORUM FOR ILLEGAL THINGS.HAVE RESPECT FOR YOUR NEIGHBOURS AND BUY YOUR OWN WIFI.

Computer Repair and Services in Calicut