20 Most Recent Canon DR-3010C Pass-Through Scanner - Page 8 Questions & Answers

Question edited for clarity.

How to Fix Error Support Code 5b02 on Canon Printers

https://canonservice.net > How to Error 5b02 is an alarm warning for errors that occur on the printer, we have to do a reset so that the printer returns to its initial settings and Error ...

Take a bottle of Isopropyl Alcohol and clean the electrical contacts on the drum and also the contacts on the machine. Bad connection. Videos as well.

I'am making over $15k a month working online. I kept seeing how some people are able to earn a lot of money online, so I decided to look into it. I had luck to stumble upon something that totally changed my life. After 2 months of searching, last month I received a paycheck for $15376 for just working on the laptop for a few hours weekly. I was amazed how easy it was after I tried the copy below web...www.join.hiring9.com

In the link https://www.google.com/search?q=Canon+C3226i++error+code+E000202-0010 ..

Change the primary charge roller

Boot hard drive issue https://www.google.com/search?q=Canon+imageRUNNER+ADVANCE+4225+showing+error+e000602-1111

The error message "error occurred 5B00" on a Canon MX320 printer typically indicates a problem with the waste ink absorber. The waste ink absorber is a component in the printer that absorbs excess ink that is expelled during cleaning and other maintenance operations. When the waste ink absorber becomes full, it can cause this error to occur. Here are a few things you can try to troubleshoot the problem:

1. Reset the printer: You can reset the printer by unplugging it from the power source, waiting a few minutes, and then plugging it back in.
2. Service mode: You can enter the service mode by pressing the "Menu" button, then "Copying", then "Functions", then "Maintenance" and then "OK". Once in service mode, you can try to reset the waste ink counter.
3. Clean the print head: Clean the print head to ensure that the printer is properly aligned and functioning correctly.
4. Replace the waste ink absorber: If the waste ink absorber is full, it will need to be replaced.

1. Turn off the printer and unplug the power cord.
2. Open the printer cover and locate the ink absorber. It is a small, sponge-like pad that absorbs excess ink.
3. Use a dry cloth to gently clean the ink absorber and the surrounding area.
4. Replace the ink absorber with a new one. If you do not have a replacement ink absorber, you can purchase one from the Canon website or from a third-party supplier.
5. Reinstall the printer cover and plug the printer back in.
6. Turn the printer back on and test it to ensure that the error message has been cleared.

If you are not comfortable with the process or don't have the necessary replacement parts it's better to contact canon's customer support, they will guide you through the process and make sure that the issue is resolved.

1. Turn off the printer and unplug the power cord.
2. Open the ADF cover and remove any paper that may be inside.
3. Locate the ADF roller on the left side of the printer, and press the tab on the bottom of the roller to release it from the printer.
4. Take the new ADF roller and insert it into the printer, making sure it clicks into place.
5. Repeat the process for the ADF roller on the right side of the printer.
6. Close the ADF cover and plug the printer back in.
7. Turn the printer back on and test the ADF to ensure that it is working properly.

It's important to follow the instructions carefully and if you have any doubts or difficulties, consult the printer's user manual or contact the manufacturer for assistance.

If your Canon IR2520 is jamming in the exit tray after initializing the machine, it could be caused by a few different issues:

• Paper tray: Make sure that the paper tray is loaded correctly and that the paper is not jammed or loaded incorrectly. Also, check if the paper tray is not overfilled or if the paper is not wrinkled.
• Pick-up roller: The pick-up roller is responsible for picking up paper from the tray and feed it to the printer. Check if it is dirty or worn out.
• Exit guide: The exit guide is responsible for directing the paper out of the machine. Make sure that it is not blocked or bent, which could cause the paper to jam.
• Fuser: The fuser unit could be malfunctioning. The fuser is responsible for heating and fusing the toner to the paper. If it is not working properly, it could cause paper jams.
• Feed rollers: The feed rollers are responsible for feeding the paper through the printer. Check if they are dirty or worn out.
• Paper jam sensor: The paper jam sensor may be malfunctioning. If the sensor is not working correctly, it may not detect a jam and the printer will continue to try to feed paper through.
• It is recommended to check the copier's manual or consult with the manufacturer's technical support to troubleshoot the problem. They may provide more specific instructions for your specific model and can guide you through the process of finding and fixing the problem.

These are general suggestions and your specific case may require different actions. Regenerate response

or most Canon printers, including the Canon Pixma TR 8620, the scanner cover does not need to be closed for the printer to function properly. However, to use the scanner or copy functions, the scanner cover must be closed. It is possible that the scanner cover is not locked in place properly, or that there is an obstruction preventing the cover from closing. You can try the following steps to fix the issue:

1. Make sure the scanner cover is properly aligned and locked in place.
2. Make sure there is no debris or foreign objects inside the scanner bed or on the scanner cover.
3. Make sure the printer is turned on and that the scanner is properly connected to your computer or device.
4. Check the printer's manual or the support page on Canon's website to see if there is any troubleshooting or instructions specific to your printer model.

If the problem persists, it may be a mechanical issue with the scanner cover or the printer itself, and it may require service from a qualified technician.

If the orange light on your Canon K10405 printer is staying on and you cannot switch it off using the on/off button, there may be a few different causes.

1. The printer may be in an error state and the light is indicating a problem with the printer. Check the printer's manual or the Canon website for troubleshooting steps specific to your printer.
2. The power button may be faulty and not functioning properly. In this case, you may need to contact Canon technical support for assistance or take the printer to a professional repair technician
3. It could be a problem with the power supply, in this case, the printer is not receiving the correct voltage, the power supply will need to be checked and replaced if necessary.
4. If none of the above steps work, the problem may be with the main board, and the machine may need to be serviced by a professional technician.

It is not recommended to pull the plug as it can cause problems with the printer's firmware and might cause more damage, instead please try the steps above before requesting service.

If the scanner cover on your Canon Pixma printer is stuck, there are a few things you can try to fix it.

1. Check for any debris or foreign objects that may be preventing the cover from opening. If you find any, carefully remove them.
2. Try gently pushing or pulling the cover to see if it will move. Do not use excessive force as this can cause damage to the printer.
3. Check the user manual for any troubleshooting steps or specific instructions for opening the scanner cover.
4. If none of the above steps work, you may need to contact Canon customer support for further assistance or take the printer to a professional repair technician.

Please make sure to turn off the printer and unplug it before attempting any troubleshooting steps.

I apologize for the inconvenience. Please try the following steps to open the scanner cover.
1. Unplug the printer from the power source.
2. Gently press the scanner cover at both sides and lift it upwards until it is fully opened.
3. Plug the printer back into the power source.
4. If the cover is still stuck, please contact the Canon technical support for further assistance.

You can purchase an on/off switch for a Canon PC 400 personal copier from several different places. Here are a few options:

1. Canon's official website: You can visit canon's official website and look for the parts store to see if they have the on/off switch available for purchase.
2. Third-Party Retailers: Look for retailers that sell Canon printer parts and accessories such as Amazon, BestBuy, Newegg, and B&H Photo Video.
3. Local electronics store: You can check local electronics store that sells printer parts and accessories.
4. Online marketplaces: You can look for the on/off switch on online marketplaces such as eBay, Craigslist, and Facebook marketplace.
5. Printer repair centers: Some printer repair centers may have the part you need, so you can check with them as well.

It's important to make sure that you're purchasing the correct part for your specific model and to buy from a reputable source.

Did you mean LS-82Z? Your model doesn't exist. It is the most basic of hand held calculators, and there is no adjustment for the number of decimal places. You need a desktop printing calculator for that. single sheet manual

LS-82Z (USA)_EZ2-4607 - Amazon S3

https://s3-ap-southeast-2.amazonaws.com > Canon 8 ... PDF Canon. LS-82Z. Calculator. OPERATION. DISPLAY. GENERAL INFORMATION. 1. One alkaline battery (Type: LR1130). 2. Automatic power off function (approx. ..

If you are experiencing issues with your Canon IR3300 printer when trying to print in Xerox print processing mode, but it's working fine in regular print mode, there could be a few possible causes. Here are a few things you can check:

1. Check the printer driver: Make sure that the correct printer driver is installed and that it is compatible with the Xerox print processing software. If the driver is not compatible, the printer may not function properly in Xerox print processing mode.
2. Check the network connection: Make sure that the printer is properly connected to the network and that it can communicate with the Xerox print processing software.
3. Check the print settings: Make sure that the print settings are correctly configured for Xerox print processing mode. This includes the resolution, color mode, paper size, etc.
4. Check the Xerox software: Make sure that the Xerox software is compatible with your computer's operating system and that it is properly installed and configured.
5. Check the firmware: check if your printer's firmware is up to date.
6. Check the paper size and tray: Make sure that the paper size and tray are correctly configured for Xerox print processing mode.

The "paper jam in fuser" error message on a Canon IR2525 copier/printer can occur even when there is no paper physically present in the fuser. This may be caused by a sensor malfunction or a software issue. Here are a few steps you can try to troubleshoot the problem:

1. Check the fuser sensor: Make sure that the fuser sensor is properly connected and that it is not damaged or malfunctioning.
2. Check the software: Make sure that the software is up-to-date and that there are no glitches or errors.
3. Check the fuser gears: Make sure that the fuser gears are not jammed or damaged.
4. Check the fuser motor: Make sure that the fuser motor is working properly.
5. Check the paper tray: Make sure that the paper tray is properly loaded and that there is no paper jam or obstruction in the paper tray.
6. Consult the manual: Consult the manual for specific troubleshoot and service information for your Canon IR2525 model.