Actiontec - GT724WG WirelessDSL Gateway - GS583AD3B-02NTS Router - Answered Questions & Fixed issues
Signal drops
The it sound as if the problem is your laptop.
Are there any other device that you can connect to the internet while disconnecting the laptop?
I had a problem once that when I connected one of my computers to the internet, the internet speed would drop to just Kbps. Try using another device, and see if it have the same results.
6/28/2017 1:33:37 PM •
Actiontec -...
•
Answered
on Jun 28, 2017
•
76 views
How do i bridge my
Version: GT784WN-VZ-1.1.6
If this is a Verizon router/modem that you are trying to connect your own router to in order to use it as the DHCP device with your home network, you will need to contact Verizon technical support and they will perform the bridging operation for you. You cannot do it yourself with many of these devices.
9/18/2016 3:55:25 AM •
Actiontec...
•
Answered
on Sep 18, 2016
•
245 views
How can I download an actiontec c1000a user manual?
The C1000A Router is branded by Centurylink. ActionTec's name for this is V1000H. The user's guide is available here:
http://setuprouter.com/router/actiontec/c1000a-centurylink/manual-1081.pdf
11/30/2015 1:02:58 AM •
Actiontec...
•
Answered
on Nov 30, 2015
•
571 views
How i can get myusername and password
Most Actiontec Modems and Routers DO NOT have a default login. The exceptions are the Actiontec Modems and Routers made and branded for a specific Internet Service Providers (ISP). Some ISP's require a default user name and password. These Modems and Routers have a sticker on the bottom of the device with the default User name and Password printed on them.
8/24/2015 12:58:32 AM •
Actiontec...
•
Answered
on Aug 24, 2015
•
131 views
Forgot my verizon actiontec router password
wifi password or the password for logging into the router settings? If you do a factory reset on the router it will put all settings back to default settings, the default password can normally be found on a sticker on the side or bottom of router. it will say "WEP" or "WPA2 key". you factory reset the router by holding down a red button (inside of a hole) on the back of the router for 12+ seconds while its still powered on.
8/13/2014 4:17:19 PM •
Actiontec...
•
Answered
on Aug 13, 2014
•
266 views
No sound on receiving tv
Do you get sound with other devices, like DVR player? If not then you have bad tv speakers. If you are using a set top box with HDMI cord I recommend replacing HDMI cable. Other than that more info would be needed to help you better
8/13/2014 4:11:24 PM •
Actiontec...
•
Answered
on Aug 13, 2014
•
49 views
Actiontec GT724WG NAT from strict to open
Factory reset the router, 98% of time solves problem with Xbox, you shouldnt have to configure and thing after the factory reset, just reconnect via ethernet or wifi. you hold down the reset button on the back of the router for 12+ seconds while the router is turned on. wait 1-2 minutes for reboot
8/13/2014 4:00:54 PM •
Actiontec...
•
Answered
on Aug 13, 2014
•
172 views
GT784WNV for Verizon DSL
Just plug into any of the 4 yellow ethernet ports using an ethernet cable. Or connect a wireless device using the SSID and Wep/WPA2 key found on the sticker on the router. If you cant find it call your ISP
8/13/2014 3:49:48 PM •
Actiontec...
•
Answered
on Aug 13, 2014
•
195 views
Does the actiontec gt701 have a wps button
nope, doesn't look like it. It might support the use of WPS pin setup, but my guess is that you just need to go the traditional route of connecting your devices using the wep/wpa2 key
8/13/2014 3:42:55 PM •
Actiontec...
•
Answered
on Aug 13, 2014
•
109 views
Why is m1000 internet light orange
Because you have limited or no internet connection. Try checking the modem first then the eathernet cable coming from the modem to your router. I actually just had this same problem and it turned out to be a bad cable.
Good luck,
Marty
6/21/2014 10:38:27 AM •
Actiontec...
•
Answered
on Jun 21, 2014
•
87 views
Reset pk5000 actiontec forgot admin password
Using a paper clip or similar object press and hold the reset button which is accessed via the hole inside the red circle on the back of the modem. Make sure you hold the button in for 30 seconds or more. You will then have reset you login id and password and reconfigure all the wireless and security features you had in there before.
2/16/2013 4:57:42 PM •
Actiontec...
•
Answered
on Feb 16, 2013
•
5,150 views
Not finding what you are looking for?