Top 20 Black & Decker RD1440K 85th Anniversary 14.4V Cordless Drill/Driver Kit Questions & Answers

Open the chuck as wide as it will open and look inside to see what type of screw/bolt it uses then using the correct tool insert it into the chuck and undo the bolt/screw, usually it will have a left hand thread so to unscrew it needs to be rotated in a clockwise directions, hold the chuck tightly but dont use excessive force if this does not work then try unscrewing it in the opposite direction, at all times be firm but like I mentioned earlier dont use excessive force.

Black & Decker... | 70 views | 1 helpful votes

Good day

Can you please supply more information

Thank you

Black & Decker... | 80 views | 0 helpful votes

there's a button behind the trigger for locking the trigger at full speed. there's a button above the trigger for clockwise and counter-clockwise rotation. there's a button on the top for hammer mode or regular mode. Hammer mode is for concrete, it basically makes the drill bit hammer in turning the concrete underneath it to dust as opposed to cutting with a sharp edged drill bit for regular stuff like wood or metal. If yours has numbers those are for torque settings, and are hardly ever used by professionals.

Black & Decker... | 201 views | 0 helpful votes

Hello, Mukund -

I am answering from the USA.

There is a Stanley Black & Decker (the current name of the Black & Decker Company) business in Dubai. See the location information here:
You can contact them by phone and ask about a battery for your screwdriver.

Best wishes.

Black & Decker... | 130 views | 0 helpful votes

Keep turning it off and on several times at the socket sounds like you need to trick the memory

Good luck

Black & Decker... | 331 views | 0 helpful votes

If it has colors, red is usually the +

Black & Decker... | 137 views | 0 helpful votes

Many times there is a allen head screw in the center of the chuck bottom that screws into the shaft of the drill if this screw is missing the chuck will unscrew off the shaft. Many times depending on the size of the drill it is a 10/32 allen screw about 3/4" long that screws into the shaft thru the open end of the chuck.. Sometimes it is a Left handed thread.Check the illustrated parts breakdown for the drill to get the correct part. Hope that helps

Black & Decker... | 708 views | 0 helpful votes

Request the wiring diagram directly from Black & Decker.

Black & Decker... | 1,033 views | 0 helpful votes

I think you need to contact Black and Decker directly,,,, I do not think they monitor this site..

Black & Decker... | 312 views | 0 helpful votes

Black & Decker may be able to supply it.

Black & Decker... | 166 views | 0 helpful votes

Hi sell both types phone No 1-800-697-3277 cost aprox ,$ SUIT CHV7250 . New bright bar $71.99... Cheers

Black & Decker... | 1,067 views | 0 helpful votes

Hi ring ,877-346-4811 replacement parts they MIGHT have one...if u can't get one there is a complete drill on E/BAY COST APROX $30 .cheers


Black & Decker... | 485 views | 0 helpful votes

The now vintage B&D model 7004 type 1 was a single-speed, non-reversible drill. There is no reverse switch.

Black & Decker... | 2,708 views | 0 helpful votes

Hi- We have instructions on how to remove the chuck listed on our website Q&A. I have included the link. Please use the instructions for the Keyed chuck. blackanddecker com

Thanks Black + Decker Customer Care

Black & Decker... | 833 views | 1 helpful votes

Not finding what you are looking for?
Black & Decker RD1440K 85th Anniversary 14.4V Cordless Drill/Driver Kit Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Black & Decker Drills Experts


Level 3 Expert

2595 Answers


Level 3 Expert

85223 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Black & Decker Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Black & Decker Drills

  • Black & Decker Drills

Most Popular Question

remove dr200 black decker 3 8 drill

  • Drills