20 Most Recent
Black & Decker RD1440K 85th Anniversary 14.4V Cordless Drill/Driver Kit - Page 7 Questions & Answers
When tighten, keyed drill chuck gets stuck
Did the left hand screw inside the chuck come loose? This happens a lot and when it does the screw will back out a little and block the jaws from closing. If not I use dry graphite lube.
Black & Decker cordless drill 9.6V chuck will not come off shaft
If it won't close the only other option you have is to break the outer collar and use a chisel to hit on the exposed jaws inside the chuck. I have detailed instructions in the tip section on how to remove a chuck from these drills. Let me know if you need more assistance.
How to unstick the chuck
Hi Gregory,You can use a 6 inch pipe wrench on the top of the chuck and an eight inch on the large part of the chuck.Put a rag in the pipe wrench jaws.Lay the drill on a flat surface with the chuck pointed at you.The handles face the same way,small one on the bottom to lock the chuck and the 8 inch on top so they look like scissors. Depending on which way the chuck is jammed will determine if the handles are on the left or right side.Gloves and safety glasses will make holding the top wrench with a bit of force to lock every thing in place.Now just a tap on the end of the eight inch wrench will loosen the chuck.If the set up is wrong you will only jam the chuck more. Thank you for choosing FixYa.
No reverse on drill.
I am assuming the new switch was wired correctly, I would look for the pin or similar device that switches it from for/rev. If your switch has a post look at the slider and make sure not broke or your pin not put in rightt position. Let me know
I pressed the button trigger
yep your right. time to look at getting a new one. dont run it anymore JUST NOT SAFE.
Best of luck
Tom
Hey would you tsake a second and rate us and if are reply was on spot :)
I have a Black & Decker 78-936 type 1 drill press.
there are detailed instructions for this at dewaltservicenet.com type in the model number as 78-936 and you can download the operators manual with detailed information. If I have helped you would you please vote accordingly and thank you.
Not finding what you are looking for?