RIM BlackBerry Torch 9800 (AT&T) Snap On Protector Hard Case "Midnight Flowers" Design - Page 5 - Answered Questions & Fixed issues
Puk code for blackberry 8320
PUK codes usually do not have anything to do with the mobile device as the PUK code is from the sim card. To get the PUK code try using another phone from the same service provider and call the customer servicecenter for your provider and they should furnish you with the code. You can also find the PUK code on the pack for the sim if you have it available with you.
Hope this solution has been helpful?
5/18/2011 11:07:36 AM •
RIM Cell Phones
•
Answered
on May 18, 2011
•
83 views
I am using my bb9700 unlocked since May 2009
yes it can i would call your service provider (611) or bring it to them immediately so they can unlock your phone to that sim. they may even provider you with a new sim even tho yours works as you have stated.
-Brian
3/27/2011 11:31:30 PM •
RIM Cell Phones
•
Answered
on Mar 27, 2011
•
97 views
I had bought new microSD for my bb bold 9700. it
the card could be formatted incorrectly or you put it in up side down or it is not completly snug in the socket
to reformat the card you will needa micro sd adapter or a micro sd USB adapter if your computer does not have an sd card slot then put the card into your computer and it should show up as a thumbrive style storage device you can then right click and reformat DOING SO WILL ERASE ALL DATA ON THE CARD this works in windows xp and 7
3/13/2011 3:16:40 PM •
RIM Cell Phones
•
Answered
on Mar 13, 2011
•
81 views
Recently flashed My Blackberry 9630
Usually when a smart phone such as the blackberry tour gets flashed and major functions such as the MMS service refuse to function it usually is because during the flashing process the new firmware which was installed has previous settings which cannot be replaced.
Some firmwares come with settings for functions like MMS, EDGE and GPRS and these settings when they cannot be replaced will ensure that these functions do not work with the network provider which is in use. Best thing to do is to take the phone to the network provider and get them to help configure the MMS settings on the phone. If this cannot be done then the phone should be re-flashed and ensure a firmware which is free from another brand is installed.
Hope this solution has been helpful?
3/7/2011 8:58:55 PM •
RIM Cell Phones
•
Answered
on Mar 07, 2011
•
88 views
I want to install
Hi, you can use the below link to know how to install net _rim_m2g on your cell phone.:
http://www.blackberryseeker.com/
Hope it helped.
Good luck..
2/8/2011 11:11:08 AM •
RIM Cell Phones
•
Answered
on Feb 08, 2011
•
43 views
I want relience caller tune
There are several ways to get your callertune set. Please refer to this article
[click here]. All codes and every steps are mentioned there. Let me know if you need further help.
Good Luck.
Thanks for using
FixYa.
2/7/2011 6:34:25 AM •
RIM Cell Phones
•
Answered
on Feb 07, 2011
•
67 views
Blackberry Curve 3G...can receive SMS but cannot
Contact your service provider and request Tech support assistance. Tell Tech support that you receive an error code on outgoing SMS messages. Request they reset your SMS service on their system. Follow any instructions they may give you.
They'll have you up and running in no time.
1/31/2011 5:42:54 AM •
RIM Cell Phones
•
Answered
on Jan 31, 2011
•
204 views
Just a querry.. just want
First, it takes 24 hours to be able to access the Internet on a BB if this is a new activation. If it's not it may be that you don't have Data Service on your account. Even if you think you do, you'll still need to contact your cellular service provider and make sure it has been added to your account. They may have overlooked clicking. the 'Data Service' box when setting up your account.
1/24/2011 6:28:08 AM •
RIM Cell Phones
•
Answered
on Jan 24, 2011
•
29 views
I have 2 Blackberry pearl
Hello,
the fault should be from the panel/board of the phone. The board is malfunctioning, that's why its draining battery fast. This is caused by the components on the board.
If you left the battery in the phone all the while the phone was not used,then this can affect the board.
The best you can do to fix the problem is to wash/clean the board with methylated spirit and a tooth brush, then dry it under sun light. Once it is completely dried, it fixes the problem in most cases except for a critical problem.
Get a phone screw driver that can fit into the screws on your black berry, remove the batter, unscrew all the phone screws, remove the
phone cover in order to gain access to the phone panel. You might need to pry the phone from the side with a small flat screw driver and you might need to apply some force to successfully take the cover apart. Gently
remove/detach the screen from the phone board.
Get a methylated spirit and a soft tooth brush, dip the tooth brush
into the spirit and use the brush to clean/wash the phone board. Brush
every part of the board with the spirit. Also clean the phone cover and make it dust free.
After that, dry the phone board/panel under an electric bulb or under
sunlight. Allow it to dry very well. Let the board get hot. Then leave
the board for 5mins or more to cool.
After that, couple back the phone, fix in the battery and try again. Phone should power on and function well again.
Good luck.
1/11/2011 9:36:23 PM •
RIM Cell Phones
•
Answered
on Jan 11, 2011
•
77 views
I have bought an optus sim card and every incoming
HI smokinsi i'm not sure which rim you have. But it souds like you have to reboot the phone by taking the battery out and putting it back in. Also you may need to use the desk top manager so that the phone is configure properly. I not sure what your looking to do Al rim phones with the exception of a few are global ready. Also not every dim card is going to work with rim products. You can go on the carrier'site and activate the sim card. The sim card sounds like it idn't configure for the phone. I’m happy to help further over the phone at
https://www.6ya.com/expert/ronald_e152e07e272e4f27
12/3/2010 6:34:28 AM •
RIM Cell Phones
•
Answered
on Dec 03, 2010
•
56 views
When i turn on my
HI VAIBHAV PALE listen you have an applications crashe on your phone . Use the bb desk top manager desk to reload your app on to the phone. The phone actually may have a bleeding screen also.Let me tell you that you best freind well be that desk top manager it will be able to reboot your phone . Make sure to let it back up your data on the phone also you will need it to be restore on the phone. Load the desk on to your desktop or laptop. Then the blackberry manager will come up. You need to plug in the phone into the desktop anmanager and let it go to work for you. I’m happy to help further over the phone at
https://www.6ya.com/expert/ronald_e152e07e272e4f27
11/28/2010 3:45:55 AM •
RIM Cell Phones
•
Answered
on Nov 28, 2010
•
83 views
SUBSIDY FOR UNLOCK CELL PHONES
you may need a new SIMS card. I locked my v3xx the same day i got it doing what you are doing. Called cs she gave a few codes over the phone that didn't help,so was told to get new one. I did, now i'm fine. I have had my phone for 3weeks now. Hope this helps.
thanks
11/25/2010 11:15:18 AM •
RIM Cell Phones
•
Answered
on Nov 25, 2010
•
61 views
Not finding what you are looking for?