Top 20 Sony RM-V202 Remote Control Questions & Answers

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier. http://electrohelponline.blogspot.com/

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

1. Turn on the component to be programmed.
2. On the remote control, press and hold the S button.
3. While holding the S button, press and release the POWER button
4. Release the S button.
5. Press and release the appropriate component button for the component being set up.
6. While pointing the remote control at the component, press and release the CH + button.
7. Press and release the POWER button.
NOTE: Repeat the previous two steps until the component responds. It may take 70 tries until the correct code is located.

8. When the component responds, press the ENT button.

singals problam

Hi,
Click Sony Support to download required user manual free copy.
Click HERE to download remote control code list.
Thanks.

Hi,

Codes for your Panasonic TX-29 AD10 TV are

018 ,016 ,007, 049, 067, 074 ,076

Thanx

Press SET and POWER button at the same time, press TV,press and release the CH+ button,then press and release the POWER button, each time you press CH+ and POWER button a code is entered. Keep trying until the TV goes Off. It may take 70 trys, when it does turn off press ENT.button to save code. hope this helps..

The remote that came with your DTV Converter Box may not control some TV brands.
Be sure to follow the remote control programming instructions below, or see your Install Guide for specific brand programming codes.
If you cannot control your TV with this remote, we recommend you use the remote control that came with your TV separately,
or buy a universal remote that can control the TV as well as your converter box. (Refer to the previous question.)

Vizio use the same codes that: Gateway, Tatung, Westinghouse, Viewsonic, Teac, Sampo, Sanyo
I have 5 codes for Vizio, 4 are the same that the 4 that I have for Viewsonic, so start traying those if you find them in your remote book. But I didn't find a match for the 5` code.

Good luck

use the following website to find your remote codes

RM-V202

http://remotes.com/store/codes_original.html

find the correct code automatically.Turn on your device.
while pressing SET botton press POWER, and release them ,then press CH+,then release it
Then press POWER repeatedly untill your device responds.don't go too fast.
When it responds press ENTER to store the code.

Thank you, but I found another Webside that have the manual and I print the manual... thnk u again... Byron

http://esupport.sony.com/perl/model-remote.pl?mdl=RMV202

Use this page to find the codes for your devices! Just select the brands and the codes will be displayed.

All questions need 'make model (what is is)' as first 3 words in every question please. Television? Stereo? Sound bar? ICE? The grinding noise makes me think you have a cooling fan issue, in which case the flashing LED would be signaling an overheat situation. You can Google sony model blink codes ..

Good set and worth getting it repaired. https://www.google.com/search?q=Sony+KDL+46v51000+parts& https://www.fixya.com/support/r29790007-repairing_own_television ..

ChatGPT 3.5

User
I need code for newstar ntr b28z for my Sony tv

ChatGPT
Unfortunately, I can't provide specific code for your Sony TV remote without knowing the exact model number. However, you can usually find the code in the user manual of your Sony TV or by contacting Sony customer support. Alternatively, you can try using the auto-search feature on your newstar ntr b28z remote to find the correct code for your Sony TV.



User
need code for newstar ntr b28z

ChatGPT
To find the code for your Sony TV using the Newstar NTR B28Z remote, you can try these general steps:

Turn on your Sony TV.
Press and hold the "TV" button on your Newstar remote until it blinks twice.
Enter the code for Sony TVs. Some common Sony TV codes are: 0000, 0011, 0080, 0111, 1234. If none of these work, you can proceed to the next step.
Press the "Power" button on the Newstar remote. If the TV turns off, the code is correct. If not, try a different code.
Once you've found the correct code, press the "TV" button again to lock it in.
If none of the provided codes work, you might need to consult the manual of your Newstar remote or contact their customer support for assistance.

Question edited for clarity, proper name, fix typo. Manual and Reviews

Manuals for HT-CT260

Sony https://www.sony.ca > electronics > support > product Find instruction manuals and brochures for HT-CT260.

Sony HT-CT260 review: Excellent sound that fits nearly ...

CNET https://www.cnet.com > reviews > sony-ht-ct260-review May 7, 2013 - The Sony HT-CT260 is our go-to budget sound bar pick, with excellent sound quality, built-in Bluetooth, an adaptable design, and no major ... Rating: 8.4/10

Sony HT-CT260 Home Theater Soundbar Review

PCMag https://www.pcmag.com > Reviews > Audio > Speakers Feb 28, 2013 - The Sony HT-CT260 soundbar adds Bluetooth to an already highly capable and modestly-priced two-piece audio system. MSRP $299.99. Pros and cons: Excellent value ? Built-in Bluetooth ? Treble response isn't the clearest ? View full list Rating: 4 · ‎ Review by Will Greenwald · ‎ US$225.00 · ‎ Out of stock ..

2 red light blinks can mean a power supply problem that can be caused by a problem on the main board. An authorised Sony repair shop can fix that for you.