Acme 5001 Supreme Juicerator Juice Extractor - Answered Questions & Fixed issues
MAKES A LOUD NOISE
disassemble clean and assemble paying attention to condition
noise from bearings going out/screeching ???
noise from unbalanced load/ lots of vibration??
noise from scraping/grinding/metal on plastic ??
noise from scraping/grinding/plastic on plastic ??
there any burning smell also ??
is any part getting warm ( turn upside down to check ) ( hold or place on thick layer of kitchen towels
be aware if it is old ~ 20 yrs give or take 20 yrs getting a new juicer will be less hassle than trying to repair
4/2/2019 3:18:51 PM •
Acme 5001...
•
Answered
on Apr 02, 2019
•
611 views
Acme Juicer
WARING HANDLES THEM AT 800 492 7464.
HOW OLD IS IT? BEARINGS COULD BE GONE.
THEY ARE REPLACEABLE.
2/16/2012 8:24:39 PM •
Acme 5001...
•
Answered
on Feb 16, 2012
•
252 views
I am not able to
Try the reset button on the bottom of the juicer.
4/26/2011 6:05:37 AM •
Acme 5001...
•
Answered
on Apr 26, 2011
•
138 views
Motor runs and is seem like it has a clutch that
The white impeller that you attached the basket and blade to is
keyed to the motor shaft. There is a small shallow nut that you
can remove with a needle nose pliers and pull the impeller off
the shaft to see if it's seated properly or damaged. If damaged
talk Waring into selling you another at 1 800 492 7464.
4/26/2011 6:00:29 AM •
Acme 5001...
•
Answered
on Apr 26, 2011
•
136 views
I have an acme juicerator
You may have tripped the reset button on the bottom of the juicer, just push
it back in. They really don't have to warm up, just give it a few seconds to reach
speed.
4/26/2011 5:52:08 AM •
Acme 5001...
•
Answered
on Apr 26, 2011
•
356 views
Filters
Do without them. They lessen the yield and cleaning
the juicer is not that difficult.
1/30/2011 5:58:32 AM •
Acme 5001...
•
Answered
on Jan 30, 2011
•
62 views
Dull Blade
Call Waring at 1 800 492-7464.
1/30/2011 5:56:53 AM •
Acme 5001...
•
Answered
on Jan 30, 2011
•
108 views
ACME Supreme Juicerator sudden extreme vibration
These juicers vibrate, I don't care what anyone tells you.
Mine is 21 years old and I find using a worn resharpened
blade, after adjusting, lessens the vibration. If your not
close to being an auto mechanic, I suggest a pulp ejecting
type juicer like the Miracle MJ1000 for about $130.
1/30/2011 5:55:48 AM •
Acme 5001...
•
Answered
on Jan 30, 2011
•
462 views
Not finding what you are looking for?