Sylvania SRT2232S 32" TV - Answered Questions & Fixed issues

I suspect you have simply switched to an unused input. If you use the original remote you can probably switch the input readily back to what you want. Dave

Main board fault. Check and replace it. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Why to ******* yourself with codes, installing etc. I order this Movie Software before a month, and I can tell it is awesome. Take a look

Without a remote control; you can't do any further adjustments. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

Programming procedure is too much to type in here by this window, and is not practical. If you wish to get details; check the site linked here. It have set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier. http://electrohelponline.blogspot.com/

Horizontal scan output section circuit fault. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/

As there is no 'Menu' button on the front panel of the TV, you should have a remote control, to adjust picture settings. If you wish to buy a genuine remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have set-up codes to your TV brand, and buy that one according to availability. The first thing you have to do is, to confirm the number of digits in the setup codes to your TV brand. There are 4 digit, 5 digit, 3 digit and even 2 digit codes. You can make it sure by entering '0s' at the code enter window the TV dispays, and asks codes. Enter 'Zeros', and count how many zeros can be enterd. That number will be the number of digit of setup code, the TV/Device need. If you can enter 5 zeros, the number of digit in the set-up code to your TV is a '5' digit one, if only 2 zeros can be enterd, the number of digits in the set-up code to your TV should be a 2 digit one, and so on.. If you wish to get more details about this, try the sites linked here. http://electrohelponline.blogspot.com/ http://electro-medical.blogspot.com/ Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

0029,0022,0026,0281,0288,0280 are the common codes to be used with Sylvania brand TVs. If you wish to get more codes and other details check: http://electrohelponline.blogspot.com/ http://electro-medical.blogspot.com/ Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

The main power supply regulator board has the fault. The starting voltage might be faint. Contact any service technician. This is not a user repairable fault.

Codes to check with Sylvania are: 2327 2304 2314. If you wish to get more, check these sites. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

Try these codes:1004, 1006, 1008, 1019, 1062, 1068, 1069, 1075, 1076, 1077, 1088, 1116, 1130, 1132, 1134, 1161, 1183, 1189, 1196, 1353These are the codes for Sylvania TVs.Check this web page for instructions:http://www.eliztech.com/remotes/rca-prog-v2.php

you are viewing in16:9 ratio (widescreen) and your tv is 4:3 you need to change your picture settings in the tv menu

Refer its user manual for details. It has all. If you haven't it, download by this link.

Sylvania MTS/SAP TV.I don't have a remoteI accidentally hit the ''menu'' button on the front. Now I can't get the TV to show anything but static -- like there is no signal coming in from receiver (either through input jacks on front or on rear. Menu gives various options, but none of them gets me back to being able to see the picture.

Remote sensor can be tested with set powered up--usually three leads where it is soldered in---with a meter one is voltage, one ground, one signal----check for the voltage with a meter but a scope is needed to test the signal.

Try these codes. They are for Sylvania TV with Comcast DTA remote control.11864, 10171, 11314

check all resistors right in crt board & resolder picture tube connection. good luck!

HelloWithout its remote control, you can't unlock this TV. Get into this link from where you can buy it. www.emtcompany.com/sylvania-srt2232s-remote/rc64.htmlThe price quoted is $19.95 [Shipping free]OK.

This can be due to moisture build up or dirt accumulating with a static charge to induce voltage and so change the customer control panel switchings.You can try with a good cleaning of the board and panels. Make sure to dry if moisture is seen. Also check for static conducion of high voltage to the control panel that can induce the inputs to work erratic.if not check the processor section- processor damage- and the board for a possible weakness.

HelloThe LOT [Line Output Transformer] of your TV. It should be replace with same type and number. Actually this is a skilled work. You have to unsoder this component out from the circuit board, and to resolder the new one in place. Have to adjust the perfect screen and focus voltage. Screen and focus voltage controls can be seen on it. This component can be bought from most of the electronic spare part shops at your tow. The number printed on it is important and should be noted. The sample picture of that component is attached here. This component also known as Flyback transformer. OK.