20 Most Recent Sylvania SRT2232S 32" TV - Page 5 Questions & Answers


Dear marygb,
This set may only need one or two small components; located and replaced. This is best done by a qualified TV tech.

Happy viewing!

Toprol


.

Sylvania... | Answered on Oct 05, 2008


Hi kmb0516.
Depends how old the set is, if it is more than 5 years old, time to tell it goodbye, if it is less, might be worth fixing.

I believe the problem is in the vertical output section, it sounds like the picture has shrunk.

Hope this helps, Greg.

Sylvania... | Answered on Sep 19, 2008


Hello,
There are 2 reasons of this problem, check TV remote control, is it working or not?
2nd reason, there can be dust in your TV, aspeacially in front of remote sensor, this can be the cause of No Remote Signal Receive.

Sylvania... | Answered on Aug 25, 2008


Did you get an answer to this. My daughter bought a used TV w/o remote and wants to view DVD only.

Sylvania... | Answered on Aug 13, 2008


The uiversal remote companies pride themselves on working with any TV. Many of them have an 800 number (should be right on the package when you buy it) that will give assistance with TVs like this. Most off brands are actually made by a name brand maker and if you (tediously) try all the codes you should find one that works at least the important features.
Hope ya fix it!

Sylvania... | Answered on Jun 15, 2008


There are bad solder connections on the vertical IC. This is a small flat IC attached to a heat sink. It should have about 9-11 pins and may be marked LA7837 or something similar. Resolder the pins on this IC and that should resolve the problem.
Dan

Sylvania... | Answered on May 09, 2008


Somehow the screen got magnetized. It needs to be degaussed (demagnetized) with coil tool that puts out a big magnetic field. All TV shops can do this for you quickly. The TV itself has a degaussing coil built right into it and everytime you start it up it does a little degaussing - that's the kind of 'boing' sound you hear. Might be able to get rid of your bullseye by turning the set on and off a bunch of times. On the other hand, if the internal degausser circuit has failed and stays on too long, it may be the source of the problem.

Sylvania... | Answered on Apr 12, 2008


Before you replace any parts, have someone (TV service tech) check the vertical size settings in the service menu.

Happy viewing!

Toprol

Sylvania... | Answered on Feb 19, 2008


  • green tint & also very prominent when there is a black screen.
  • this problem is due to degaussing effct or magnetic effct in tv.
  • please remove magenatic material near tv like speaker or headphone.
  • if you have turned the direction of tv please bring to normal put the tv on & put it off for 30 minutes & now put it on it will be ok.
  •  do not turn tv when it is on
  • hope this will help.

 

Sylvania... | Answered on Oct 22, 2007


There may be a reset facility on the TV. Check the back, it will be a very small posh switch, size of ball-=point pen. If available it should restore to factory setting

Sylvania... | Answered on Oct 06, 2007


If you unplug the unit for an hour or overnight, it should go out of sleep mode. If this dosent work then its not in sleep mode and the set has a problem in the power supply or the sweep circuit. Sorry you should seek a pro to assist you in this repair. Good Luck

Sylvania... | Answered on Jun 30, 2006


You will need to be more specific. If the set is completely silence when trying to power up, assuming the power button is not broken It might be the power supply unit.

Sylvania... | Answered on Mar 22, 2006


Consider using 'auto search' on Motorola.
how ?
Turn on your TV and point the remote at TV during setup
1. Press and hold SETUP until the LED blinks twice
2. Press the TV POWER key.
3. Aim the remote at your TV and press and hold down the OK key.
4. Release the key when the TV turns off and setup is complete.

Sylvania... | Answered on Jan 07, 2020


consider using 'auto search' on Motorola.
how ?
Turn on your TV and point the remote at TV during setup
1. Press and hold SETUP until the LED blinks twice
2. Press the TV POWER key.
3. Aim the remote at your TV and press and hold down the OK key.
4. Release the key when the TV turns off and setup is complete.

Sylvania... | Answered on Jan 07, 2020


Better late than never. The problem is that your TV is in the service mode. There are many ways this can happen. But, lets just get down to fixin this! With the original remote and the TV on. If the TV will not shut off, do this. Press the left cursor button on the remote, followed with pressing the right cursor. Power off the TV with remote, or press off button on TV.

Secondly, your TV will power on and off. But you have flashing colors. Do this. With the original remote and TV on. Press the up cursor button, on the remote, followed with pressing the down cursor. Power off TV with remote, or press off power of TV. Thanks for asking me, Matt of Martins TV Repair.

Sylvania... | Answered on Dec 16, 2019


Curtis International which made the Sylvania clock radio no longer has any support for its legacy electronics. ManualsLib has manuals for several Sylvania clock radio models here: https://www.manualslib.com/brand/sylvania/clock-radio.html . They have a link for the SCR1388B, https://www.manualslib.com/manual/944856/Sylvania.html . This document doesn't list the SCR1388B on the cover page. However, the two clock radios are probably similar enough that the manual will help you use your clock radio. If this manual doesn't provide enough details, please check some of the other manuals listed at the first link above.

I hope this helps. ManualsLib does provide an option to get the manual as a PDF. See the Download button near the top of the page. You will need to go through some CAPTCHA checks to download the file as a PDF.

Cindy Wells

Sylvania... | Answered on Dec 13, 2019


Google (sylvania)(DV220SL8)(manual) without parens.

Sylvania... | Answered on Dec 03, 2019

Not finding what you are looking for?
Sylvania SRT2232S 32" TV Logo

131 questions posted

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Caltronic TV Repair
Caltronic TV Repair

Level 1 Expert

12 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sylvania Televison & Video

  • Sylvania Televison & Video

Most Popular Question

codes sylvania tv

  • Televison & Video
Loading...