Top 20
Uniden BC244CLT Base Scanner Questions & Answers
Why no audio?
Unfortunately, due to the age of the model we can no longer troubleshoot. We apologize for any inconveniences this may cause.
City police codes , frenquincy
Different police departments use different frequencies. You need to be a little more specific when asking a question on the World Wide Web.
Set up
You may download a copy of the manual
here. Clock setup instructions begin on page 7, scanner programming instructions begin on page 11.
I have an old BC
ok on your BC145XLT go to manual and manual to channel one and enter your frequencie number and then hit enter button and your frequencie is there....
How do I program an 8 digit frequency into the
Just forget the 8th digit. If it's a zero it's meaningless (last digit zero never needs to be programmed). If it's anything else the scanner will still pull in the signal without the last digit.
Need the manual for your scanner? You can download and print it, at no cost, here:
http://www.uniden.com/pdf/BC244CLTom.pdf
Bill B.
Listening in since the 60's
Thinking of buying Uniden Bearcat BC244CLT will it
It will work just about anywhere in the world, including Oklahoma. The BC244CLT is a conventional scanner though, and it will not work with trunked or digital systems. To find out what frequencies and systems are currently in use in your area, visit:
www.RadioReference,com
Bill B.
Listening in since the 60's
I have a Uniden BC200XL.
The only realistic way to improve reception is with a better antenna. You can find a wide selection at sources such as eBay and ScannerWorld.com
Bill B.
Listening in since the 60's
Bc142xl progaming channel
The operating manual for the BC142XLT is on my "impossible to find" list, but scanners in the 14x series are nearly identical in programming and operation, so this manual will walk you through the programming steps
http://www.box.net/shared/it6eozctkb
For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com
Bill B.
Listening in since the 60's
How do I find out
For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com
If you need any more help with this scanner, please let us know at FixYa.com
Bill B.
Listening in since the 60's
Scanner quit broadcasting frequency codes
For a comprehensive database of active frequencies in your area (they're not codes), visit:
www.RadioReference.com
If you need a copy of the manual to assist you in reprogramming the scanner, you can download and print it, at no cost, here:
http://www.uniden.com/pdf/BC244CLTom.pdf
Bill B.
Listening in since the 60's
I have a Uniden Bearcat
Your scanner is a basic 10-channel "oldie" and it's fairly simple to program and operate. To enter/program a known frequency:
- Power the scanner On
- Press MANUAL to stop scanning
- Press MANUAL repeatedly to advance to the channel that you wish to program
- Enter the desired frequency, including the decimal point (e.g., 156.225).
- Press E to enter the frequency into memory
Press the MANUAL key to advance through the channels, and press SCAN when you're ready to listen.
For a comprehensive database of active frequencies in your area, visit:
www.RadioReference.com
Bill B.
Listening in since the 60's
MY scanner was stored for a long time that the
You can download and print a replacement manual, at no cost, here:
http://www.uniden.com/pdf/BC244CLTom.pdf
For a comprehensive database of active frequencies in your area, visit:
www.RadioReference.com
Bill B.
Listening in since the 60's
Im poor no income ,can
For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com
Bill B.
Listening in since the 60's
The scanner is programmed, but
Hi, my name is John. Welcome to FixYa. Press the SCAN button again, adjust the SQUELCH to where it is silent. Press the SCAN button again. Check to make sure you don't have all channels LOCKOUT. Thanks for choosing FixYa.....John
Not finding what you are looking for?
