Top 20
Philips Magnavox 27MS343S 27" TV Questions & Answers
Dvd freezes
If less than a year old, this TV is likely under warranty but should have been taken back immediately to address the issue. I suggest contacting the vendor or manufacturer.
My sound stopped working on my tv
It might be that the sound amplifer is defective if you know anything about electronic you can fix it . If not better take it to someone who can repair it.
The amplifer is the part of electronic that amplifies current so the speekers can be driven. Check it if there is a bad solder or anyhing suspicious.
Magnavox 25TS52
If its a LCD set not plasma I would look at the connectors going in and out of the Tcon board, remove them and reseat them, if that doesn't help replace the board.
There is one other thing you can try and that is remove the board and put it in your oven at I think its 370 degrees for 10 minutes, Ive never tried doing this but there are some vids on people having good luck doing this, what happens is there are some cold solder joints on the components and putting it in the over will heat them up and the board will work again, search this on youtube and there are vids on how to do it.
Tv working fine, then suddenly,pop and black screen, sound is ok
The issue here is that the zeners in question are merely like a safety fuse and replacing them before identifying and fixing the cause of the problem will only cause your replacement zeners to blow aswell.... personally if it is a true plasma it likely chews through alot of power anyway so I would take the opertunity to replace the TV with a newer much less power hungry led TV and in doing so save the hip pocket and the environment.
Magnovox squiggly lines when cable is plugged in.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.
View the site by desktop or web view on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts...
4 diget code for magnavox model M27MS343S
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.
Where can I get replacement picture tubes for my Signature 2000 television set?
I would not think that they would exist now, Tubed televisions and monitors are very old technology and when I was working in the mid 90's there was almost none spare around.
What existed was put straight into the production line.
I have another concern that some of the last tubed monitors came with what I call an extra focus to compete with flat screens sharpness. This resulted in a flyback transformer that had three presets on it, those I came across had blown up their respective tubes because of over voltage applied.
It would be worth checking if yours has this development and if so then I would give up because parts will not be around.
If you have a blurry/soft picture due to low emission then a heater booster transformer to give it an extra 10 or 20% but they may not even exist now, if it is going bright or dark then that may be a sign of G2 voltage problems which is that transformer issue and destined to "pop"
You may be lucky but I would not bother, sadly a sign of the times as they say.........
My magnavox tv will not power on light turns yellow
I have many thoughts to this problem, having seen many sets before in the past, one issue could be software related which all sets now have, with value range sets this tends to be a more basic code and can be easily bothered by other remote controls for other equipment and lock up, so powering off and trying again is a good starting point.
Remote controls can suffer with poor battery connections or batteries which in turn cause a remote to miss-fire a command, in another answer on fixya I pointed out that its rubbery buttons or contact mat under plastic buttons can sweat leaving a residue which causes miss-fire (the amount over the years I have cleaned).
Its a matter of prying apart (and or screws) if you are lucky clean contacts with meths spirit and soft rag (few are glued together but most are clipped).
In a modern set they have many little power supply circuits for each system (oldies had one big lump) these have to fire up within a certain time or a "fault" is deemed by the system so goes to standby or shuts off, if the set repeats this problem in a short time period it may have a fault which only an engineer could solve.
Hope this helps
How do I get freeview on Sony bravia TV 42w815bsu 42"
If this model number is what I am seeing then it has an aerial socket so needs an aerial and then setup to tune it in, perhaps you do not have or allowed an aerial then its broadband and one of the companies that have TV feeds.
If its not what I think and an analogue thing then you need a "box" to do this feeding a video audio signal via another cable.
Without more info hard to give any other advice.........
How to set my comcast remote to my magnavox tv
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Type in the brand name of your device, in the search box [at the top right] of the display window, and press enter to get all related posts. It will make surf easy.
Not finding what you are looking for?
