E-Machines W3052 PC Desktop - Page 6 - Answered Questions & Fixed issues
Facebook com login sign in
What message?
According to Facebook Support Page...
Facebook stores your password in such a secure way that we don't know what it is, and we can only check if it's correct. If you can't remember your password, you can request a new password.
If you can't log into Facebook and need to reset your password:
1.Go to the login page at
https://www.facebook.com
2.In the top right, click Can't log in?
3.Type the email, phone number or username associated with your account, then click Search and follow the on-screen instructions
7/23/2014 2:00:12 PM •
E-Machines...
•
Answered
on Jul 23, 2014
•
120 views
How to tell if your hard drive goes bad
There are different ways to find out if your hard drive is bad.
1) use command line option that is chkdsk (drive letter) without bracket. ex. chkdsk c: or chkdsk d: , After checking your drive if it says it have some bad sectors then your hard drive is bad. there are tools to remove bad sectors but that will cure your drive for sometime. (better take backup)
2) if your drives gives knocking or constant clicking sound then your drive is bad
Above are the most common issues with drive.
7/21/2014 7:24:12 AM •
E-Machines...
•
Answered
on Jul 21, 2014
•
41 views
Emachine has black screen?
OK, going to have to guess a little on my side. Is the computer a laptop? If so are all the lights on the laptop on when it's started?
If it is a laptop - could be a back light - light that illuminates the screen, so it can be seen. IF this computer is a desktop, well - check all your connections to make sure they are well connected and same thing, do you see the power on lights. If so, you can start to figure it has something to do with your display or video card (on-board or dedicated video). Greatest of luck If you need further help, I’m available over the phone at
https://www.6ya.com/expert/william_02fc2766c1e13b73
7/19/2014 2:39:59 PM •
E-Machines...
•
Answered
on Jul 19, 2014
•
41 views
How to download video from sdcard to computer?
If your PC doesn't have a built in Card-Reader you will need to buy one (you can get them at Pound shops & they only cost 1 pound). Then it's simply a matter of plugging the card-reader into a USB port, pop your SD Card into the relevant slot in the card-reader, wait for the necessary drivers to be installed & your SD Card will show up in 'My Computer' as a removable drive. Open it & copy away.
Hope that helps.
7/18/2014 3:08:45 AM •
E-Machines...
•
Answered
on Jul 18, 2014
•
38 views
Diagram put back together
Hello
Not to much information from you . Here is a E-Machine assembly for the motherboard .
The power switch is a 2-wire connection to the Motherboard. The 2 pins on the motherboard it connects to will be labeled something like PW. The polarity on it doesn't matter. There will also be a power LED connection. Usually those wires are green and black. Green is positive. There's also a hard drive activity LED with (usually) red and black wires. Red is positive. Hopefully that polarity will be marked on the motherboard. If not, try it one way and if the LED doesn't light up, try it the other way. The power (green) LED should be on whenever the PC is on. The hard drive (red) LED will be on whenever the drive is being accessed.
There might be pins on the motherboard for reset. Some computers don't have a reset button. In that case you wouldn't connect anything to it. If your case does have a reset button then connect the wires to the reset pins on the motherboard. Polarity doesn't matter for that.
Hope this helps
6/27/2014 2:22:37 PM •
E-Machines...
•
Answered
on Jun 27, 2014
•
129 views
My e machine computer will just shut off after 5 or 10 min.,
I had an Emachines W3609 that did the same thing, I changed the 350-watt power supply with a 550-watt and it still shut off, even using the newer one. I thought just the first one was bad but I guess not. It had more than enough power to power it up but nothing. And it used to randomly restart at times and then just shut off. Try and get a new hard drive maybe that will help. Good luck!
6/14/2014 3:42:46 PM •
E-Machines...
•
Answered
on Jun 14, 2014
•
78 views
Installing ATAPI DVDW
This has happened to me so many times, with Vista and XP. I had to go on another computer and download the drivers from the website for my PC model, and download them and put them on a flashdrive and install them on my PC I had the issue with. They worked than, I had an issue with my Ethernet port. So hopefully this helps.
6/14/2014 3:09:10 PM •
E-Machines...
•
Answered
on Jun 14, 2014
•
49 views
Not finding what you are looking for?