E-Machines W3052 PC Desktop - Page 3 - Answered Questions & Fixed issues


Knowing the beep pattern will help diagnose the issue. Power on the computer again and listen for long beeps and/or short beeps. There are other possibilities, but if you just cleaned out the computer, I suspect you might have dislodged a memory stick. Make sure they are seated completely and the white tabs are locked securely in place. The beep code you hear will ultimately help determine where the failure is happening.

E-Machines... | Answered on Aug 12, 2015 | 98 views


try booting to safe mode. by using f8

if that works, try a system restore to a previous date.

if that does not help, then it must be a windows corruption and parallel install or repair install will be needed, it can also be fixed by manual troubleshooting and repairing the files.

E-Machines... | Answered on Jul 30, 2015 | 64 views


it depends if it a pc or laptop you can HBCD 15 OR HIGHER TO CLEAR THE PASSWORD. IF IT IS A CMOS PASSWORD YOU CAN TRY TO CLEAR IT BY TAKING OUT THE CMOS BATTERY AFTER YOU UNPLUG THE COMPUTER OR BY USING THE JUMPER TO CLEAR IT (SOME, BUT NOT ALL).


How to Clear Your Computers CMOS to Reset BIOS Settings

How to Reset Your Forgotten Windows Password the Easy Way

http://www.wikihow.com/Delete-Someone's-Windows-Password

E-Machines... | Answered on Jul 23, 2015 | 71 views


"Stumble" is not an appropiate computer term. I don't understand what do tyou mean by getting or not a picture when you stumble

E-Machines... | Answered on Jul 20, 2015 | 74 views


Hi,

Can you post any other details about the device you are using, the operating system, that sort of thing?
Was there any other error message on the display?

I post on behalf of HP.

E-Machines... | Answered on Jul 14, 2015 | 64 views


you would like to order a bios, emachines might sell them.

E-Machines... | Answered on Jun 02, 2015 | 45 views


the moon button sends it to sleep. when you do that, windows nearly always fails to restart.
press and hold the power button for 15 seconds then try re starting it.

E-Machines... | Answered on Jun 02, 2015 | 42 views


here is a website with a number for emachines assistance. it's not emachines/acer but outsourced.

they don't offer recovery media for free.
Welcome to Answers by Acer Answers by Gateway Powered by Sutherland Global...

E-Machines... | Answered on Jun 02, 2015 | 72 views


Hi

The pc has a POST (power on self test) default that it runs before the pc can boot.

it is a hardware default setting that cannot be bypassed without connecting a keyboard or mouse to it
24564297-m35oz4jvdfvvmght4a51n0jl-2-0.jpg

the CMOS settings may allow you to disable the keyboard and mouse function before the pc boots if that pc has the feature

24564297-m35oz4jvdfvvmght4a51n0jl-2-1.gif
f1 or delete etc to access it

then go through each setup setting and see if there is a disable function to disable the keyboard or mouse etc

24564297-m35oz4jvdfvvmght4a51n0jl-2-3.jpg
standard ps 2 connectionSs and some are USB connections

24564297-m35oz4jvdfvvmght4a51n0jl-2-6.jpg
cheers

E-Machines... | Answered on May 28, 2015 | 126 views


Sounds like there was a surge when you plugged in the charger, and it fried the system. Chances are the data is recoverable if you remove the hard drive and install it in a different computer, but to me it sounds like that machine is dead.

E-Machines... | Answered on Apr 28, 2015 | 54 views


you can buy them from microsoft or any windows 7 supplier.

E-Machines... | Answered on Apr 26, 2015 | 102 views


ac97 is the most comon one

E-Machines... | Answered on Apr 13, 2015 | 38 views


not custom parts what you could do is take the old one to the shop and see if they have got one that will fit yours.

E-Machines... | Answered on Apr 13, 2015 | 37 views


yes as long as they are compatable take your 512 to the shop with you and they will check to see if it will.

E-Machines... | Answered on Apr 13, 2015 | 52 views


then its telling you your battery needs replacing

E-Machines... | Answered on Apr 13, 2015 | 45 views


no,,just add more ram,its not wise to add more power than you need.

E-Machines... | Answered on Apr 13, 2015 | 46 views


try driver magic its alot better

E-Machines... | Answered on Apr 13, 2015 | 36 views


goto your control panel click on the sound icon and try and set from there.also check you have the sound driver if not it wont work.
go into your device manager and see if the driver is there,

E-Machines... | Answered on Apr 13, 2015 | 34 views


if it does not have a back up windows on your laptop you will have todo it using a disc.or try this.1 Go to start menu
2 Click on all programs
3 click on Emachine
4 click on Emachine recovery management
5 Click on restore on the bar across the top
6 click on restore to system factory default.

E-Machines... | Answered on Apr 13, 2015 | 43 views

Not finding what you are looking for?
E-Machines W3052 PC Desktop Logo

Popular Tags

30 questions posted

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...