20 Most Recent
E-Machines M5310 PC Notebook - Page 9 Questions & Answers
Need to get into start up menu
- Start PC in safe mode, normally Pressing F8 key when windows starts up.( Google it)
- In Safe Mode create a new user, with administrator privileges and protect it with password.
- Remove unwanted software's & programs.
- Empty the Recycle Bin.
- Download reliable program RegInOut to fix OS registry properly.
- Restart your PC normally and log on to the new account created.
Stay Happy :-)
RESTORE EMACHINE E528 TO FACTORY SETTINGS
Try restarting...when the eMachines splash screen appears (e)...press Alt+F10 at the same time...this is the method I learned about when my eMachines recovery management would not complete the restoration process...mine is a desktop pc...but give it a try and see what happens.
Where doe's power led,power sw,hdd led on my e-machine
You will need the user's manual for your machine to make sure that you are hooking the wires up correctly. However, most motherboards label these connections directly on the motherboard next to their pins. Look for an area on the mother motherboard with two rows of six to eight pins. Next to them you should labels such as PWR_SW (power switch), RST_SW (reset switch), HDD_LED, PWR_LED, etc. You won't mess anything up connecting something to the wrong pins, but it isn't that hard to figure out as the wires are usually labeled in the same manner as the pins. So HDD_LED would plug into the HDD_LED pins, PWR_SW to PWR_SW, etc.
Www emachines com support
try changing that power switch with restart switch SETS, i do that coz i dont really use restart switch. or check computer store, i recommended accessories or repair store.ask for set of power switch cable. usually they does have it on sale.HOPE SOLVE..
Emachine el1352g 41w
If this is the boot drive, connect to the SATA 0 connector at the back of the motherboard. It is a one way connector about 1/2 inch long.The power is a wider connector that will be loose and comes from the power supply (the cubical metal box).Both will connect to the back edge of the drive.Note that they will only go on in one position, so if it doesn't go on fairly easily,flip it over and try again.
10/23/2013 12:08:39 AM •
E-Machines...
•
Answered
on Oct 23, 2013
White screen after using usb port
white screen usually means the cable behind the screen has come detached or that cable is damaged. Don't see how the usb has anything to do with it unless it was shorted against this cable.Typically its the cable going to the screen. Sometimes you may get it to work by rocking the screen back and forth from open to close, thus verifying that it's this cable.If this is a macbook, however, a white screen may mean something different.
Fault finding
1.not much info here.>> please leave a model number <<2. more info on issue would help (wont power on, boots to bios but not windows) ill assume the word dead means the system wont power on.3. if the system will not power up then the led is likely communicating a POST message. POST messages can be referenced on the e machines support site. 4. typically one would remove all non-essential hardware and try to boot (ram is pretty much the only essential hardware {depends on the model})\/ if no info on POST messages is found or is not helpful \/5. Power supply can be tested with a multi meter if you have a multi meter see here:
http://pcsupport.about.com/od/toolsofthetrade/ht/power-supply-test-multimeter.htm6. (WARNING there is a slight chance that you could harm the donor supply try this at your own risk) you can try swapping power supplies if you have one that is compatible (from an old machine or from a different machine for testing purposes). if it boots with diff PSU then that's the problem.\/ for the brave \/ (de-soldering \ soldering can be difficult without the proper equipment and technique read up first)7. look for bulging capacitors on the motherboard if caps are bulging they can be replaced with caps that are exactly the same.
E machine has to be manualy maximized every time I
Sounds like the driver is corrupt for the video and it is using a standard VGA driver that defaults to a lower resolution. Access the emachines website which is now owned by Acer i think and download the correct Video driver and try to reinstall it.
MY SHOCK WAVE ON FARMILE ON FACEBOOK WANT LOAD AND WHEN IT DOES IT IS SLOW DOING IT REAL SLOW
First of all close facebook then delete your temporary files by going into internet options click on settings then view files. Then click on edit then select all or click on organize then select all. Hit the delete key on your keyboard. Then close the temp folder then hit the delete key on the next window then hit the delete key on the next window. Close internet options window. Then test your shock wave and flash wave installation:
http://www.sciencejoywagon.com/physicszone/plugtest/shock.htmDo the installs of the addons you should see the reb ball bouncing in the small box at the top. Then on the right side click on the arrow and do the installs again. After you see the red bouncing ball cloce the web page then try your game on facebook.Terry
My e machine has to b e maximized each time I sign
Go to >Start > Run > in the text field type "msconfig" (without quotes). > Go to start up programs and see if you see the program that relates to the "maximize" program that requests to start each time then remove the check from the box. Use caution in this msconfig program. It's hidden for a reason!
Not finding what you are looking for?