20 Most Recent Philips PM3S Remote Control - Page 2 Questions & Answers

need the code for a magnavox dvd-vcr tv

memorex TV 0002, 0502, 0506, 0706, 0115, 0704, 0601, 1302, 0428, 0632, 0701 OR 0002, 0502, 0506, 0706, 0115, 0704, 0601, 1302, 0428, 0632, 0701

I bought a Philips TV and have a remot from my previous TV and want to program my old remote to the new TV. It is a ONE FOR ALL, URC-4330804. What code can I use to program it ?

TRYING TO ADAPT TO SONY TV

does anyone have the manual for Philips universal t.v. remote..I lost my manual. and need some help.Thank you in advance.Jeanne

Visit our website and search for your TV model number. Remote control codes can be found by clicking Support.

Try re-coding the remote. Hold down STB and OK for a few seconds. Then when the red light is steady on the STB button you put in the code 000. By doing this you have reset the remote control. Also a good trick is to remove the batteries and put them back in. With that you are basically turning the remote off and on again. The good old restart.

WHAT BRAND TV IS IT?I CAN HELP.

The codes are, 007,107,516,608,618,718,807,901..Turn the TV on, aim the remote at the TV,press and hold the CODE SEARCH button until the light turns red, press TV, the light will blink once and stay on,enter one of the three digit codes, the light will go off, if not, you will need to try another code until it does, press the POWER button, the TV should turn off....hope this was helpful...

Check www.remotecentral.com for the manual and codes.

Hello, the Westinghouse TV's are able to use only the Sony codes for the universal remotes, other than that I would recommend emailing the Westinghouse parts department at [email protected] and requesting an original remote for your unit, the price on the remote is $15 plus shipping and handling.

0713, 0502, 0606, 0409, 0710, 0415, 0507, 0714, 0405, 0712, 0015, 0916, 0008, 0002, 0115, 0224, 0324, 0126, 0326, 0826, 0228, 0430, 0632, 0435, 0437, 0903, 0505, 0701, 0407

You can get the codes on link below .

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=US&slg=AEN&sct=REMOTE_CONTROLS_SU1&cat=REMOTE_CONTROLS_CA1&grp=SOUND_AND_VISION_GR&session=20100120230931_99.56.239.16&ctn=US2-PM3S&mid=Link_RCCodeFinder&hlt=Link_RCCodeFinder


And manual on link below.

http://download.p4c.philips.com/files/u/us2-pm3s/us2-pm3s_dfu_aen.pdf

For dvd- 0241,0641,0099,0698,0345,0696,0340 .For audio-0780,0682,0183,0983,0987,0088,0099,0696. Philips NOW,FINALLY has a website for their remotes and codes..google for their website if these codes dont work- I've had really good luck w/the long,slender MULTI_FUNCTION remotes,which you would probably need for Home Theater In a Box [HTIB}

http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000053128.pdf

I hope the above helps.i can only get you the manual,as i don`t know what you are connecting to.

If your product does not respond after you have tried all
the codes for your brand, or if your brand is not listed,
try searching for your code by following these steps.
1. Manually turn on the device (TV, VCR, etc.) to be
controlled.
2. Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
SEARCH button.
3. Press and quickly release the desired mode button
(TV, VCR, etc.). The red indicator blinks off once.
4. Press the CHANNEL UP button repeatedly (up to
300 times) until the device to be controlled changes
channel. The red indicator blinks off with each
button press. If you accidentally overshoot the
code required, press the CHANNEL DOWN button
to backtrack through the library until the device
changes channel. Pressing CHANNEL UP changes
direction to forward again.
5. Press and release MUTE to install the code.
Most users will store VCR codes under the VCR button,
Cable codes under CABLE, etc. If (for example) you
want to store a VCR code under CABLE, first follow the
procedure for Direct Code Entry (previous page) and
press CABLE in step 2 of Direct Code Entry, then enter
ANY VCR code in step 3 of Direct Code Entry. Then
follow the steps above for Code Search (or Brand
Search, below). Note: If the device does not have a
CHANNEL UP button, use PLAY (VCR only) or
POWER instead. Code Search starts from the currently
stored three digit number under that mode. Good Luck.