20 Most Recent
Philips CDR775 2-Disc CD Recorder - Page 3 Questions & Answers
I have a Philips CDR775. While playing
If this would have been a lens problem the music should have stopped way before the display - bad advice. Your problem is in the processor of unit, it lock up.
This can be caused by a lot of things but it's usually from the capacitors on th power source - they dry up, the voltage is no longer filtered accordingly and the spikes cause a phenomenon called latchup. To clear it you must disconnect the source from the mains to allow the capacitors to naturally discharge - this is why you need that 10 minutes break.
The player is fixable - all you will need to do is to replace all the electrolytic capacitors from the power source and mainboard.
Phillips cdr775/00 how do i
MANUAL RECORDING FROM COMPUTER HEADPHONE SOCKET.. FIRST RIGHT LEAD REQUIRED YOU NEED STEREO 3.5mm stero jack plug to lef right phono male leads...
prepare for manual record place jack in computer headphone socket. check correct socket play track on computer their should be no sound. if sound present in wrong socket... if ok place phono left right into analogue aux inputs on cdr recorder.next make shure you have blank scratch free cd .next press ext(ernal) source repeatedly until the required input is selected i.e digital analogue optical etc..when auto track is on the disk will number automatically.with auto track on it their needs to be 2.7 second gap to rec number change. with the recorder stopped press rec type five times to enter in the manual record standby mode. manual start s to flash and the display shows REC EXT MAN followed by WAIT.after a few seconds press record . play the source track ie on your computer to set record level on cd recorder.. adjust audio card settings or volume control on pc etc .rotate easy jog/enter key until on the record /play level bar all the blue led are alight but not the red( clipping) display shows xx decibel eg 3bd. stop the source material (track on computer get ready to record ii.e to start track again..to start recording set you track going wilst pressing RECORD on the cd recorder, and immediatley the source material playing. the track number and recording time left appear in display . if check input message is displayed check the connections are correct etc .to stop recording press stop on cd recorder . update lights up and arrow goes out. after recording display will show UPDATE FOR SEVERAL SECONDS WRITTING TOC.. IF YOU WANT TO PLAY THIS DISC ON NORMAL CD PLAYERS YOU NEED TO FINALIZE THE TRACK . HOPE THIS HELPS..yammandan.
OPC Error
It implies a media Optical Power Calibration problem (google it). Did you recently start using a different type or brand of disc?
My cdr775 does not work with Memorex blank music
same again here my philips machine would only use there own brand i used to get them from a pound shop no problems with them could not use any other make so thats why i sold my machine the ones i bought were audio cd
I trying to hook up My philip Cdr 775 to a denon
Depends on what you want to record and what capabilities the other equipment has - analog audio passed through the Denon and/or digital audio from it or another device, like a CD player. There are both Inputs and Outputs.
Treat it like a tape deck: It will have analog input from the receiver's Tape Out jacks and it will send analog playback and monitoring to the receiver on the Tape In jacks. (Page 14)
Ditto for compatible digital connections. (Page 15)
You can find the manual on Retrevo.com. Just register and download it. You're going to need it to make use of the machine anyway.
When i play cd's the player frezzes
Hi, the tracking motor on the lens Assembly is faulty, you will need to either replace the tracking motor or the entire optical lens assembly.
Not finding what you are looking for?