20 Most Recent Sharp 13VT-K100 13 in. Combo - Page 9 Questions & Answers


Make sure the internal speakers are turned ON
That is an adjustment in the AUDIO menu.

Sharp Televison... | Answered on May 13, 2019


1) Press Channel down and Volume Down button from LED panel a same time.
2) Page option will display.
3) Select 9/10 page by pressing up and down button.
4) EEP option will display.
5) Press Ok button.
Switch Off and Switch On from Main LED work properly

Sharp Televison... | Answered on May 12, 2019


This 'K' usually denotes that you are in the 'service mode', and to exit it, you normally just switch off at the mains, (unplug the TV).

If you press 'input' and volume down ('-') together, OR,
volume down '-' and channel down '-' together,
that should take you into you into the service menu proper.
You use channel up/down to navigate the menu, (and volume up/down to alter the values).
You could try this, and see if there's a 'Factory Reset' option if just switching off doesn't work, but DON'T alter any of the service settings (if you use the reset, you will have to re-tune etc.)

Sharp Televison... | Answered on May 12, 2019


Request the diagram directly from Sharp. Be sure to specify the type of diagram you wish, e.g., schematic

Sharp Televison... | Answered on May 10, 2019


Clearly something has happened that is forcing the resistor to handle too much current and while it is tempting to believe the culprit is close by, the difficult fact of dc coupled circuits means the possible fault could be several stages away. Troubleshooting modern electronics is really a job for an experienced person who has access to a service sheet and appropriate test equipment, especially an oscilloscope. Modern digital electronics and switch mode power supplies mean a voltmeter is less use than a means of examining waveforms and duty cycle...

Sharp Televison... | Answered on May 08, 2019


if it has a usb slot then id say yes..

Sharp Televison... | Answered on May 08, 2019


check connections and input or source

Sharp Televison... | Answered on May 04, 2019


if cords don't match try a converter to combine cords and change input or source

Sharp Televison... | Answered on May 04, 2019


If that is a true smart TV then set up your other wireless or wired ethernet to access the adapter on the TV. When everything is kosher at that point you should be able to pick up your programming. Good luck

Sharp Televison... | Answered on May 03, 2019


go into tv set up and reset

Sharp Televison... | Answered on Apr 30, 2019


go into input or source change input to HDMI if no luck try cable setting and channel search and use 3 or 4

Sharp Televison... | Answered on Apr 30, 2019


go into set up tv air and channel search

Sharp Televison... | Answered on Apr 30, 2019

Not finding what you are looking for?
Sharp 13VT-K100 13 in. Combo Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Televison & Video

  • Sharp Televison & Video

Most Popular Question

any way access screen menu sharp 13f m50

  • Televison & Video
Loading...