20 Most Recent NEC PlasmaSync 42MP3 42 in. Television - Page 2 Questions & Answers

0helpful
1answer

No remote

If you wish to buy its original remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have setup code to your TV/device brand. You should first make sure about the number of digits in the codes to your device have. There are 3-digit, 4-digit, 5-digit and even 2-digit codes. You can get this detail by the code list attached to every universal remote control. The brand name of the remote control you select isn't a matter; but, its code list should have setup codes to your TV/device brand, otherwise you can't set it up with your device. Check out, which brand remote control has setup codes to your TV/Device brand. Setup code list & setup procedure to some popular brand remote controls are given. Check it, and determine which brand remote control should be bought, and buy that brand remote control, according to availability. Check the sites linked here. Set-up code list, and Set-up procedure to many popular brand remote controls are given. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Timeslide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.You can also do a search, by type in the brand name of your TV / Device, in the search box at the top right of the display window.
11/10/2013 7:22:25 AM • NEC PlasmaSync... • Answered on Nov 10, 2013
0helpful
2answers

Looking for service menu of 32Q6TVH LCD TV (NEC and Onida)

HI FRIEND,
I DON'T KNOW THE SERVICE MENU OF NEC BUT TO ENTER IN ONIDA PRESS VSM AND DISPLAY BUTTON SIMULTANEOUSLY, FROM ORIGINAL REMOTE .
JABBAL,
9422117997
NAGPUR
10/28/2013 9:43:18 AM • NEC PlasmaSync... • Answered on Oct 28, 2013
0helpful
1answer

Onida co150xfsa sound IC burned it IC number

Audio output IC number differ set to sets. If you wish to get more details, check the site linked here http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.
10/10/2013 9:40:01 AM • NEC PlasmaSync... • Answered on Oct 10, 2013
0helpful
1answer

I am forgetting my onida tv password please send

1107 is the password to check. If you wish to get more, check this link. http://electronicshelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.
10/7/2013 1:11:15 PM • NEC PlasmaSync... • Answered on Oct 07, 2013
0answers

Onida tv

Be the first to answer 7/15/2013 3:00:16 AM • NEC PlasmaSync... • Posted on Jul 15, 2013Be the first to answer
0helpful
1answer

Hotel model on password model 20 oxyzen

go to hotel and get a remote
4/1/2013 3:33:20 AM • NEC PlasmaSync... • Answered on Apr 01, 2013
0helpful
1answer

Ondia lcd tv power supply power

Hello,The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular power supply, or excess power supply or power surge.The TV is receiving current but cannot circulate or transfer the current to other necessary part of the TV because of the defective power supply board. You might be lucky it's just a blow fuse. Also a defective transformer can cause your TV not to power on.All these can be checked on the power supply board.But more often bad capacitors causes problem on the power supply board. I do not think the power board needs replacement, rather those defective capacitors is causing this issue. Open unit up and take a look at the power supply board.You will probably see one or more electrolytic filter capacitors that are bulged up in the top-not perfectly flat like the others.The value of these capacitors will be different, most likely they will be somewhere around-820 to 2200uF/25 V( or /10V sometimes)You can replace them with same values but I would recommend the voltage rating to be higher(like 35V for an original 25V) for reliability purposes.What happens is,these bulged top capacitors will cause a low and unfiltered DC voltage=main board will malfunction(the relay will keep clicking until the caps are holding enough charge to bring the voltage up over a threshold point).You can buy these capacitors at any Fry's or Radioshack store or you can order them online at vendors like "mcmelectronics.com"(look for electrolytic capacitors). After replacing these capacitor(capacitors) most likely the normal operation will be restored. Or you can by a refurbished complete power board to save you some stress.Note: There may be also some other causes for this symptom ,like a defective T con board ,or main board,but the bulged top capacitors are the most common cause for this issue.If you don't know about TV repairers, take the TV to the nearest repairman to fix the fault for you. Also, note that TV stores a lot of current, so wait a while before opening the TV back cover.I hope this helps.Regards
11/9/2011 8:37:49 PM • NEC PlasmaSync... • Answered on Nov 09, 2011
Not finding what you are looking for?
NEC PlasmaSync 42MP3 42 in. Television Logo

119 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a NEC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NEC Televison & Video

  • NEC Televison & Video

Most Popular Question

just monitor or television as

  • Televison & Video
Loading...