20 Most Recent RCA DRD485RG DirecTV DTV Receiver - Page 8 Questions & Answers

Yellow is the video connector.. if you don't have a yellow connection on the TV, try the red, green and blue till you find one that works. You might also need to change the input to get it to work.

Are you asking how to factory reset?

• RCA DVD Player 3160 , 3161 , 3302 , 3370 , 3371 , 3393 , 3409 , 3477 ,3505 , 3517 , 3601 , 3604
• RCA TV 1000 , 1003 , 1004 , 1005 , 1006 , 1007 , 1019 , 1054 , 1055 , 1082 , 1096 , 1098 , 1099 , 1100 , 1101 , 1102 , 1103 , 1129 , 1179 ,1181 , 1188 , 1190 , 1196 , 1202 , 1203 , 1212 , 1215 , 1233 , 1257 , 1258 ,1266 , 1278 , 1279 , 1281 , 1286 , 1352
• RCA VCR 2000 , 2003 , 2007 , 2013 , 2021 , 2022 , 2055 , 2056 ,2082 , 2083 , 2084 , 2085 , 2086 , 2087 , 2088 , 2089 , 2090 , 2091 , 2100 ,2107 , 2115 , 2120 , 2125 , 2140 , 2173 , 2184 , 2250 , 2252 , 2253 , 2261

Auria TV 5 Digit Remote Control Codes 11423 10017 11265 10178 10856 11178 Auria TV Codes for RCA 3 in 1 Universal Remote = 12087 ON MOST REMOTES (Generalized): 1. Turn on the TV. 2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light. 3. With the button lit, point the remote at the TV and enter the TV's 3, 4, or 5 digit code. 4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up. 5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored. No one buys Universal Remotes, they are so 1990s :>D You buy a facsimile remote which is an exact copy of the original, no programming needed and all the original functions. https://www.google.com/search?q=32+inch+auria+tv+replacement+remote+control Your search query is 'make model replacement remote control'. ..

Your LED backlights

Bad capacitors in the power supply

Take it back and ask for another!

The website is heavily dependent on scripts and are often glitchy. Often posters will post and not complete. We only delete Duplicate comments, inappropriate comments and spam posts. Sorry about that, it happens. https://www.fixya.com/users/george-l-pate Here is some information, but post again. We now have a television expert called Larry. https://www.google.com/search?q=RCA+46%2C+I+have+no+backlight ..

According to Funai service literature (parent company of RCA) the 6538 uses panel # HV650QUB-N90 and 6549 uses # LK650RA1A01

check that you have the input or source set correctly on the remote.

People don't buy Universal Remotes any longer. You buy a copy remote for your make and model https://www.google.com/search?q=RCA+SLD40HG45RQ+remote+replacement These are the codes 5 digit codes for RCA televisions are: 11547 11447 10047 10093 10679 11047 11147 11247 11347 11781 11948 11953 12002 12187 12247 12434

This set has a block fuse that sits to the right of the power plug. Problem is replacing it won't fix a thing, it will blow the one you put in. this could be a shorted P/S diode, FET, zener diode ect on the hot side of the board or it could be a shorted component on the cold side, that will blow the fuse as well. Buy a new board, don't try to fix it.

Assuming it goes black after using the tv for a few minutes its probably a bad capacitor on the power board inside the Tv but there are a few other things that can cause this but not enough information to determine

Your LED backlights are shutting off, the question is are they shutting off because of burned out buttons and the backlight section in the power board senses that and shuts down or is the signal from the main turning off so the lights go out. Do you have a multimeter and able to take a couple measurements?

082,091,057,029 are the codes to check. If you wish to get more setup codes, check this link. Pull up older posts there. Setup code list and proceedings to some popular brand remote controls are given.

Your TV's Component 1 and 2 (and the Composite 1 and 2) RCA ports are video and audio inputs. They do not connect to the sound bar audio input. Based on the image here, https://www.manualslib.com/manual/509607/Element-Eldft404.html?page=8#manual , your TV has a coaxial digital Audio Out. You need a converter to connect the TV to the sound bar. A coaxial to optical digital audio converter is here: https://www.amazon.com/C2G-40018-Coaxial-Converter-Compliant/dp/B0002J2MV4 . There are also many digital audio to analog converters available, https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 . Some of these support both coaxial and optical digital audio to analog. Note: many of these do not come with the audio cables. You have to purchase them separately. I hope this helps. Cindy Wells

Other RCA VCRs have had problems with flashing timer lights. Those could be fixed with service from an electronics repair person if it doesn't stop even after being unplugged for a while. But, try leaving it unplugged for a few hours. If that doesn't work, the electronics repair might be the way to go, or get a different VCR on eBay or from the local thrift store for pretty cheap.

Try these codes. 0163, 0182, 0186, If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your set, in its search box on the right side. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ http://electronicshelponline.blogspot.com/ https://homenol.blogspot.com/

RCA stereo cables you need to connect rca model drc200n to your tv

Probly not since its not a tv. But search utube or pinterest