20 Most Recent RCA F36685 36" TV - Page 9 Questions & Answers

People don't buy Universal Remotes any longer. You buy a copy remote for your make and model https://www.google.com/search?q=RCA+SLD40HG45RQ+remote+replacement These are the codes 5 digit codes for RCA televisions are: 11547 11447 10047 10093 10679 11047 11147 11247 11347 11781 11948 11953 12002 12187 12247 12434

This set has a block fuse that sits to the right of the power plug. Problem is replacing it won't fix a thing, it will blow the one you put in. this could be a shorted P/S diode, FET, zener diode ect on the hot side of the board or it could be a shorted component on the cold side, that will blow the fuse as well. Buy a new board, don't try to fix it.

Assuming it goes black after using the tv for a few minutes its probably a bad capacitor on the power board inside the Tv but there are a few other things that can cause this but not enough information to determine

Your LED backlights are shutting off, the question is are they shutting off because of burned out buttons and the backlight section in the power board senses that and shuts down or is the signal from the main turning off so the lights go out. Do you have a multimeter and able to take a couple measurements?

082,091,057,029 are the codes to check. If you wish to get more setup codes, check this link. Pull up older posts there. Setup code list and proceedings to some popular brand remote controls are given.

Your TV's Component 1 and 2 (and the Composite 1 and 2) RCA ports are video and audio inputs. They do not connect to the sound bar audio input. Based on the image here, https://www.manualslib.com/manual/509607/Element-Eldft404.html?page=8#manual , your TV has a coaxial digital Audio Out. You need a converter to connect the TV to the sound bar. A coaxial to optical digital audio converter is here: https://www.amazon.com/C2G-40018-Coaxial-Converter-Compliant/dp/B0002J2MV4 . There are also many digital audio to analog converters available, https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 . Some of these support both coaxial and optical digital audio to analog. Note: many of these do not come with the audio cables. You have to purchase them separately. I hope this helps. Cindy Wells

Other RCA VCRs have had problems with flashing timer lights. Those could be fixed with service from an electronics repair person if it doesn't stop even after being unplugged for a while. But, try leaving it unplugged for a few hours. If that doesn't work, the electronics repair might be the way to go, or get a different VCR on eBay or from the local thrift store for pretty cheap.

Try these codes. 0163, 0182, 0186, If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your set, in its search box on the right side. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ http://electronicshelponline.blogspot.com/ https://homenol.blogspot.com/

RCA stereo cables you need to connect rca model drc200n to your tv

Probly not since its not a tv. But search utube or pinterest

The eject button is on the remote control only. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. All the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check these sites too. http://remotesearch.blogspot.com/ https://elektrotricks.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops; as well as online shops. Visit the sites by Desktop computer and type in the brand name of your device in the search box at the right column. It will help you find the remote you have to buy. Mobille view has no search box.

sounds like you should have asked for assistance when and where you bought it .

IF there is one, it will be hard soldered to the power supply board. https://www.fixya.com/support/r29790007-repairing_own_television ..

we could never figure it out but perhaps your local repair service can

Programming procedure https://voxxintl.zendesk.com/hc/en-us/articles/225309147-Programming-the-RCA-RCU4GLW-Niteglo-Remote-Control Zenith Remote Codes Zenith Universal Remote Codes Zenith Universal Remotes Codes for all devices: 101, 142, 149, 177, 201, 224, 225, 229, 237, 153, 154, 172, 401, 460, 461, 498, 501, 502, 521 In reality, the days of Universal Remotes are over. People buy remotes SPECIFICALLY for the set you have from places like this. A direct copy aka, a facsimile copy. https://www.replacementremotes.com/zenith/sb1327w-tv ..

Repair the power supply.

Investigate for a failing power supply

I am guessing that your TV is not working anymore and can't connect to the wifi and the internet anymore.

Probable power supply failure

RCA universal remote control have to setup code to Vizio. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check these sites too. http://remotesearch.blogspot.com/ https://elektrotricks.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops; as well as online shops