20 Most Recent RCA F27450 27" TV - Page 7 Questions & Answers

0helpful
1answer

What is the resolution of a RCA SRS Rear Projection Television?

Television resolution, it will produce 1080i or 480p using the component input jacks. No way as sharp as 720p. This is of course dependent on your cable provider ..
12/2/2022 3:22:44 AM • RCA Televison &... • Answered on Dec 02, 2022
0helpful
1answer

Universal Remote codes for my crossly eye juke ?

There isn't one! Televisions, DVD and Set top boxes only. You buy a replacement Crossly remote from the maker. https://www.google.com/search?q=crossly+I+juke ..
11/28/2022 9:21:35 PM • RCA Televison &... • Answered on Nov 28, 2022
0helpful
1answer

What could be wrong with RCA LED55G65RQ with pilot light blinking red?

I assume "pilot light" is the standby light you're referring to. On most Funai brands including RCA, a continual flash of the standy light indicates inverter shutdown, pointing to bad LED backlights, new ones can be ordered from shopjimmy.com and you can install them yourself, no special tools are needed, however watch a couple youtube vids to see some tips on how to do it.
11/27/2022 3:29:51 AM • RCA Televison &... • Answered on Nov 27, 2022
0helpful
1answer

I have an Ilive DVD/CD player. With no remote so I purchased a RCA rcr804bfdr/rcr804br series 4 in 1 universal remote control. I need the code to program this device.

RCA remote control have no set-up code to Ilive brand devices. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.
11/23/2022 6:33:53 AM • RCA Televison &... • Answered on Nov 23, 2022
0helpful
1answer

How to program a RCA 26211 remote to a element DVD player

If you have an RCA 26211 remote, you can program it to control a DVD player by following these steps: 1. Press and hold the "Setup" button on the remote until the red light on the remote blinks twice. 2. Enter the code "9-9-1" on the remote. The red light will blink twice. 3. Press and hold the "DVD" button on the remote. The red light will blink twice. 4. Enter the code for your DVD player on the remote. The code will be four digits long. 5. Press the "Power" button on the remote. The DVD player should turn on. You can find the code for your DVD player in the manual that came with the player, or you can look it up online.
11/21/2022 11:54:40 AM • RCA Televison &... • Answered on Nov 21, 2022
0helpful
1answer

RCA F19421 service menu please. I need to fix the tv's overscan.

RCA Service Menu Instructions In order to access the service menu on your RCA TV you will need to have a remote, if your remote is lost or damaged we recommend that you purchase a Replacement Remote before trying to access the service menu on your set. Method 1
  1. Press the INPUT button on the remote.
  2. Then press the 2, 5, 8, 0 buttons in quick succession.
Method 2
  1. Press the MENU button on the remote.
  2. Then press the 1, 1, 4, 7 buttons in quick succession.
Categories:
11/6/2022 8:57:24 PM • RCA Televison &... • Answered on Nov 06, 2022
0helpful
1answer

RCA TV Model #RTU6549-C where is the backlight fuse?

Of the thousands of models of TV's manufactured in the last 10 years with LED lighting there has never been a set with a fuse in the backlight section. Most likely the lamp strips are bad and need replacing
11/4/2022 12:44:46 AM • RCA Televison &... • Answered on Nov 04, 2022
0helpful
1answer

Need help connecting Bowfell bluetooth sound bar to Upstar 27 tv ?

Hi, bluetooth means that you'll be using a wireless connection. You'll need t set the soundbar bluetooth connection on by first turning on the bluetooth connection within your Upstart 27 tv. Once the tv connection is on then you'll need to activate the bluetooth device search from your Bowfell and search for your tv in order to pair the 2 devices. You might need to reference the soundbar manual to understand what unique buttons on your device to use to move forward with the strategies that I've listed above. Thank you.
11/1/2022 12:31:13 AM • RCA Televison &... • Answered on Nov 01, 2022
0helpful
1answer

I have a 52 inch rca that after moveing it up onefloorwont turn no green it worked downstairs

Is it a projection set without a model number I can only make a guess. If your using "component cables' on it, one of them isn't plugged all the way in or the cable broke while unplugging it, swap out the cble and let me know. Thanks Techman 57
10/25/2022 6:33:30 PM • RCA Televison &... • Answered on Oct 25, 2022
0helpful
1answer

Dad powered off tv while tv was on. Now there is no picture, just audio. It is an RCA 42LED

Question edited for clarity. It is not a good idea to post your phone number to the 11 million annual viewers of this website. Try power cycling it. Remove the wall plug for 5 minutes and plug it back in. It looks like that set is a Walmart special, so it will be cheaply made. Try a factory reset https://www.google.com/search?q=RCA+42LED+reset ..
10/25/2022 6:31:28 PM • RCA Televison &... • Answered on Oct 25, 2022
0helpful
1answer

RCA 52" Television. After relocating it to upstairs, it wont turn on, but did before moving it?

Are you sure the wall socket is ok , have you tried another outlet .
10/18/2022 3:37:41 PM • RCA Televison &... • Answered on Oct 18, 2022
0helpful
2answers

How do I program an RCA 16s400

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the relative post easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/
10/7/2022 6:15:28 PM • RCA Televison &... • Answered on Oct 07, 2022
0helpful
1answer

How to program an rca RE20QP80 remote control to a different tv

You can't. OEM remotes are only made for that set or a range of sets within the same series. https://www.amazon.com/Anderic-RE20QP80-Replacement-RE20QP06-CSTRE20QP18/dp/B07NM2SF88 ..
10/2/2022 3:43:17 PM • RCA Televison &... • Answered on Oct 02, 2022
0helpful
2answers

My rca cc275 camcorder won't stay on

bad power transformer
9/19/2022 4:43:49 AM • RCA Televison &... • Answered on Sep 19, 2022
0helpful
1answer

How to connect to the internet with rca led4250a TV

You could buy an Amazon firestick and try, however you will need amazon prime.
8/30/2022 8:57:16 PM • RCA Televison &... • Answered on Aug 30, 2022
0helpful
1answer

I am looking for RCA C8540 output transistors. Where can I purchase this item.

redux 1too long other post )(deleted)I can not help you lacking maker and model of this RIG<<<<
8/30/2022 8:57:12 PM • RCA Televison &... • Answered on Aug 30, 2022
0helpful
1answer

Is rca led4250a tv a smart tv and Bluetooth and or internet compatible?

the answer is no. here is a link to instruction manual.
8/29/2022 11:14:08 PM • RCA Televison &... • Answered on Aug 29, 2022
0helpful
2answers

I wish to connect the Sinotec 55 to my Phillips soundbar , which inly had one set of Rca inputs , which are bringing sound to it from the Dvd player ?

55 is not the model, 5.1 sound but I will take your word on jacks many cheap TVs have only HDMI , no RCA jacks Video/audio in/. and I see yours has the 3.5mm phone jack style AV in well that really is Audio left/right sound, TRS so all you do is buy a RCA 2 CABLE audio, TO 3.5MM ADAPTER AND USE THAT. pick the gender of both ends. 2 cable to 1, not 3to 1 . https://www.fixya.com/answer/answerpageslideview.aspx?thid=29885463&ctg=465&brd=298
8/21/2022 9:31:59 AM • RCA Televison &... • Answered on Aug 21, 2022
Not finding what you are looking for?
RCA F27450 27" TV Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...