20 Most Recent
Bush 2871NTX 28" TV - Page 3 Questions & Answers
Annoying problem
U HAVE TO JUST REPALCE THE MEMORY OF THIS TELEVESION SET BRING SOME TELEVESION MEACHNIC AND REPLACE THE MEMORY IC OF THAT SET .
Power supply fault?
Check all electrolitic capacitors at power supply area : better replace them.
Zoom in and zoom out
Hi.
Try looking in the menu under PICTURE. see if there is picture size adjustment for picture size eg 16 x 9 4 x 3 normal wide.
Broken on/0ff switch
as you are not a technical person get it fixed by a skilled man.
it is a simple job of hardly 30 minutes.
new switch is available at low cost.
it can be connected directly if you do not want to change switch.
caution
please do not not open back cover unless plug is out as high voltage is input to switch
How do I switch to Av manually?
You may have to get an exact replacement to get ALL the set's functions to operate. Universal remotes don't let you access all the functions of some TV's
If you can use the buttons on the front of the set to bring up the menu, you may be able to scroll through it and find where you can select the type of input you want. You would select AV.
Stargazer
Tuning in takes ages whilst warms up
IF your TV is not one of the real old ones, you have a problem with the automatic tuning system.
Some component in this circuit most likely a capacitor or coil is changing its electrical properties due to temperature which in turn causes the set to be off frequency until it warms up.
A capacitor (condenser) can do this quite often.
Stargazer
Bush 2871ntx ak19 28"TV
cold solder joint on the power supply or in the vert curcuit. If you know anything about the proceder to troubleshoot cold solder connections GO for it but if you dont and dont wanna cause any other problems with the set My advice would be to take it to a pro before any other problems arise if they already havent. Its not a major repair most of the time.
Tuning in the channels
I couldnt find the owners manual, But your gonna need the remote control and go into the menu and go to auto tunning with the antenna attached and it should do all by its self. If that dosent helo then try going to a stre that sold it to ya or one that sells them and they can lead you in thr direction on where to contact the manufacturer for a replacement owners manual. Good Luck
Bush Smart Television. Lost WiFi on it?
Question edited for clarity.
Question moved from Smart Computers to Bush Television.
No, if is worked before, you don't need a booster. It is a software glitch or a WiFi setting that is incorrect.
Factory Reset the television. Re-enter the WiFi settings, (SSID and Password), and then do any Software Updates.
Google
bush (model) factory reset
All questions need 'make model (what is is)' as first 3 words please.
..
Not finding what you are looking for?