I have a Samsung UN55NU7300FXZA ?
Hi Juan, any Samsung model with the 2nd set of letters of NU has panel issues. You're on the right path when you isolated some of the ribbon connectors, generally only one pin is causing the issue, you have pins 9 to 12 isolated if I understand right, try isolating one pin at a time and see if you get a somewhat normal picture, naturally it's not going to be 100% as you have some dead pixels doing this. If this doesn't get rid of the line there is only one other way to fix it, you will need a thermal camera for this however, it's one of the COF IC's that are shorted, there should be 4 or 5 flat cables on each panel board, with the set running with the pins on the main board ribbon cable in place measure the heat of the IC's, one will be higher than the rest, that's the bad one, you can remove it and the set will work again without a noticeable issue, be sure to use a sharp blade when removing the IC or you will short the pins.
8/30/2023 5:30:45 PM •
Samsung...
•
Answered
on Aug 30, 2023
•
55 views