20 Most Recent Samsung PS42P2S 42 in. Plasma Television - Page 6 Questions & Answers

Pls report it to Samsung for remedy in warranty. Try to contact here.

Warranty comes from name brand on set contact them immediately.

unfortunately these boards are now obsolete, it may have damaged the bridge rectifier

it sounds there is a fault in your board. You should contact tech-person for servicing your tv.......Just an idea... wait some other expert will describe better.

Thanks
Iqbal

Unless you haven't tried the suggested 000-??? for a Samsung tv then you're out of luck. Remote codes are supplied by the manufacture to go with units. If the codes they give don't work, then there are none.

You must start by checking the panel supply voltages, if you look on the panel inside the unit you should see a label with a lot of voltages on it, such as V-set, V-scan, Va, Ve, there are test points on the power supply board and DC _DC board, that has the test points and the small adjustors for those voltages, check and see if they are correct or not, then start unplugging the cables connected to the other boards and check all the voltages again, those supply boards have a latch on circuit that will cause it to shut down, if you have back lights though, it could be only a board swap, most of the time it's a logic board or main board or a Y-main board, but you poweer supply could still be defective, good luck

Yes take set to repair shop this is not a fix it yourself problem!

Set needs to be taken in to repair shop this is not a fix it yourself problem.

Take to repair shop this is no easy fix it yourself problem!

Take set to repair shop this is not a fix it at home problem!

Yes it can be repaired cost ???? Depends on you on how much your willing to spend on repair.Good Luck. ThankYou for using FixYa. Have a Nice Day.

A computer cord is the same as the original. Go to any Radio Shack or TV shop and ask them to check the fuse to see if it is good or bad. If it is good, then suspect moving damage. If the fuse is bad, the person checking the fuse should be able to suggest a proper replacement. After replacing the fuse ( only if it checked bad), re apply power and hope the set comes on. If the fuse blows a second time, you need to call a technician. One other thing, some sets have a vacation switch that can accidentally get pushed during a move. Consult with the owners manual to verify if your set has one.

Yes, a computer power cord is the same.
Without physical sign of damage, it will be hard to induce the movers to cover the problem. You will need to take it into a reputable TV shop and get their evaluation that whatever is wrong is due to the move. Its odd that it failed while off, however of course all these new TVs are not near as reliable as the old ones. Might just be a dislodged connector inside.
Hope Ya Fix It!

move scart plug a little,sound wire is near end of plug,and sometimes does not connect

yeah the problem maybe that ur power supply is not correct u should drop it off at 10 aston drive bulwell we have the correct supply!!

sounds like a logic main board

bro you should take it to the repairer,No other options you have. it can't be fixed by doing anything accept changing it's screen or repairing it, if it's possible

Hello. You can check HDMI cable in this case. If you're using an HDMI port that's not working well or has been damaged, it could result in a darker-than-usual screen. If you switch the cable or change devices and the TV is at a regular brightness, this is the case.