20 Most Recent
Focus Camera Sony KDL70W850B 70-Inch 1080p 120Hz 3D Smart LED TV Google Chromecast HDMI Streaming Media Player 3m High Speed Orange Gold HDMI Cable for 2160p, 3D, and 4K Focus 32"-70" TV Bracket Mount 165 LBS Capacity Monster Surge Protected AC 7 Outlets - Page 5 Questions & Answers
Why does my show green light then red light the whole time when i switched it on
It indicates that the TV is not receiving enough power to operate normally.
- The power cord or outlet might be faulty or loose. Try plugging the TV into a different outlet or using a different power cord. Make sure the cord is firmly connected to the TV and the outlet.
- The TV might have a blown fuse or capacitor. This would require opening the TV and replacing the damaged component. This is a risky and complicated procedure that should only be done by a qualified technician. Do not attempt to do this yourself unless you have the necessary skills and tools.
- The TV might have a software glitch. Try resetting the TV to its factory settings by following these steps:
- Turn off the TV and unplug it from the power source.
- Press and hold the power button on the TV for 10 seconds.
- Plug the TV back in and turn it on.
- If the TV shows a menu, select the option to restore factory settings. If the TV does not show a menu, repeat steps 1-3 until it does.
Is there any other way to charge my onn portable dvd player
You don't have to rely only on the original charger for your onn portable DVD player. You can charge it using other methods: * **Power bank:** Charge your player while you're out and about using a portable power bank. * **Car charger:** Keep your player powered even on long road trips with a car charger. * **Universal AC adapter:** Plug your player into a wall outlet with a universal AC adapter that's compatible with your device. These options give you flexibility and convenience, allowing you to charge your portable DVD player in different settings.
Using a oki C9300 and my prints is are darker than it should be.
Here are some steps you can take to improve the print quality:
Calibrate Your Monitor:
The most common reason for prints appearing darker than the display is a mismatch between the monitor and the print. Your display should be adjusted to match the print, not the other way around.
Ensure that your monitor is properly calibrated. Use professional image editing applications like Photoshop or Lightroom to soft-proof your images. Soft proofing allows the display to simulate how the print will look.
Adjust your monitor's brightness, gamma, and color temperature to match the desired print output.
Check Your Editing Software Settings:
In Photoshop or other photo-editing apps, review your soft proofing settings. Make sure you're using the correct working space profile (such as Adobe RGB) and that it accurately represents how the image will appear when printed.
Soft proofing helps you visualize how the print will look based on the printer's ICC profile.
Printer Settings and ICC Profiles:
Understand that your printer operates independently of the display. It prints directly from the image stored on your computer's hard drive, not from the display.
The printer has no knowledge of what the display is showing. It uses its own ICC profiles to interpret colors.
Make sure you're using the correct ICC profile for your printer and paper type.
Color Management:
Color management ensures consistency between devices (display, printer, etc.). Properly managed color workflows help achieve accurate prints.
Consult your printer's user manual or online resources for specific color management instructions.
Print Test images:
Print test images with varying colors and gradients. Observe if there's a consistent issue (such as overall darkness or color shifts).
Adjust printer settings, such as brightness, contrast, and color balance, to achieve better results.
Paper and Ink Quality:
Use high-quality photo paper designed for inkjet or laser printers.
Ensure your ink cartridges are not expired or low on ink.
Remember that your display and printer use different technologies (transmitted light vs. reflected light) and have distinct color gamuts. Calibrating your monitor and understanding color management will help bridge the gap between what you see on the screen and what you get in your prints.
For detailed instructions specific to your OKI C9300 printer, refer to the user manual. What follows is how to install ICC profiles. The profile may be making your print darker.
For Windows Users:
Download the ICC Profile:
Visit the website of your paper manufacturer or other trusted sources.
Locate and download the relevant ICC profile for your printer, ink, and paper combination.
Save the profile to a convenient location (e.g., My Documents or Desktop).
Install the ICC Profile:
Right-click on the saved ICC profile file (it should appear as an RGB triangle).
Choose "Install Profile" from the context menu.
Alternatively, if you can't add the profile directly, copy it to this folder: C:/Windows/system32/spool/drivers/color.
Adjust Color Management Settings:
Open the Control Panel.
Navigate to Color Management.
Tick the "Use my settings for this device" option.
Click "Add..." and select the installed ICC profile.
In the Advanced tab, click "Change system defaults", then choose "Use Windows display calibration".
Close all windows. That's it. You are ready to rock.
What is the best indoor antenna
There are many that work well but it will depend on your environmental conditions. Proximity to the wall, windows, etc.
A good one to consider is the RCA ANT3ME1.
Lock button on ecco tv
Welcome to Fixya !
It happens sometimes you may accidentally locked your ecco TV
Try to Use the music button on the remote, i hope this solves your problem to unlock it
Do Comment if its helpful to you
Not finding what you are looking for?