Samsung HT-DB120 System - Page 2 - Answered Questions & Fixed issues

Unplug your AC power cord for a minimum of 30 seconds to clear the RAM. The RAM is used solely for dvd class history, and clearing this should solve your issue. If you want to convert your player to region free, which will allow you to play ANY dvd: 1 Disconnect your player from its power source for thirty seconds 2) Reconnect your player to its power source 3) Press the Power On button on your remote control 4) Press the Enter button on your remote control 5) Press the 8 button on your remote control 6 Press the 4 button on your remote control 7) Press the 2 button on your remote control 8) Press the 6 button on your remote control 9) Press the 9 button on your remote control 10)Press the Enter button on your remote control 11)Your player should now place itself in Standby mode 12)Press the Power On button on your remote control A word of caution if your convert your player is that disc eject issues may arise in which you will have to eject from the unit, or toggle your power switch on/off.....good luck my friend.

1) Disconnect your player from its power source for thirty seconds 2) Reconnect your player to its power source 3) Press the Power On button on your remote control 4) Press the Enter button on your remote control 5) Press the 8 button on your remote control 6) Press the 4 button on your remote control 7) Press the 2 button on your remote control 8) Press the 6 button on your remote control 9) Press the 9 button on your remote control 10)Press the Enter button on your remote control 11)Your player should now place itself in Standby mode 12)Press the Power On button on your remote control. Your player is now region free. A word of caution is that you may have disc eject issues, in which case you will have to eject from the unit, or toggle the power switch on/off. This issue only arises if you have a particular chipset in your player (about a 20% chance).....good luck my friend.

try a hard reset of leave it off for 24 hours it worked for me if there dont help im out of ideas bestr eguards nick

when unplug it from the main outlet, sometimes it goes to defualt setting. check your audio setting..make sure you set according to the speakers that you have. good luck

Could be that the lazer is faulty.try multizoning unit. switch on unit with NO disc inside. press enter,press 84269 and press enter again. unit will switch off.

Try opening the zoning code. Unit must be switched on with NO disc inside. press enter,then enter the code 84269 and press enter again.unit will switch off. switch on unit and try again.

See my post "HT-DB120 - PROTECTION due to shorted output stage "

See my post "HT-DB120 - PROTECTION due to shorted output stage "

Try disconnecting the speakers one at a time. You may have a shorted speaker. If all are disconnected and it still does not come on, then, you probably have a shorted output.

The HT-DB120 has an automatic shut down that should turn off after 20 min of idle mode, it seems yours is malfunctioning. try disconecting the DVD from power for a few minutes.

Yes. The laser lens in your player is dirty or failing. To fix your problem, try the following solutions: Clean the laser lens with a DVD player lense cleaning disc. Lense cleaning discs are available at many electronics retail stores.

On the rear of your TV connect, with a phono/RCA cable to the Audio R + L sockets, connect the other ends to your Yamaha using the TV in sockets. See photos attached Hope that helps. HDMI is for video unless the extra pins are added for audio.

See service manual. There are no fuse in it. Service Manual: SA-WX900 ' PDF ' Loudspeaker ' Electronics (scribd.com)

See page no 65 troubleshooting in user manual YPU4J-CANADA-ENGLISH0.0_0610.indd (samsung.com)

See following link, it may resolve your issue My MP3 Player Is Locked Up (Frozen). ' Samsung Africa

Normally makers don't play ball between each other. Yes if it was a Samsung Television and a Samsung Receiver A/V System. Or if you have something like a Cable Box or Satellite System that is made to interact with other makes. Or if it is a Universal Remote. I think you were just lucky that it happened to use the same frequency. Look in the manual for a scan command. https://www.google.com/search?q=Connect+Samsung+OLED+S90+remote+to+Yamaha+RX-V361+via+optical ..

Check battery. It may require replacement.

Check the battery. It may require replacement.

You would have to define 'it'. In a question talking about two items, you need to clearly state 'make model (what it is)' for both items. The main item should be the first 3 words in the question. ..