20 Most Recent Epson WorkForce WF-4630 Wireless Color All-in-One Inkjet Printer - Page 4 Questions & Answers

Sometimes if you shut it completely down for a minute or two then turn it back on it will clear itself

Hi, there are many possibilities why your scanner is undetected by your computer. It can be its logical connection, scanner driver or the scanner itself.If you have Windows operating system, please check Device Manager. In the Device Manager please check for the following: 1. Any yellow or red X's, question marks or exclamation marks related to the scanner. 2. Under the Category of Imaging Devices - Check for Epson Product name. If IMAGING DEVICES is listed, test the scanner from PAINT as follows. If IMAGING DEVICES is not listed then the scanner is not being recognized. Try another USB port or cable until the scanner shows up in the Device Manager. (The scanner must be on and connected in order for the computer to recognize it) If you see an Imaging Device that points to your Epson Scanner or Unknown Device that has a yellow question mark or exclamation point, you need to update the driver. Try to scan in Paint to isolate the issue between your computer and scanner. To scan in Paint, do the following: 1. Click on START > ALL PROGRAMS > ACCESSORIES > PAINT. 2. Click on FILE then select FROM SCANNER OR CAMERA. 3. Choose COLOR PICTURE. 4. Scan. If it does not work, it is possible your Windows Image Acquisition (WIA) service is not started. To restart this process please follow the steps listed bellow. 1. Click on Start > Control Panel > Administrative tools 2. Double-click on Services to access the list of available services. 3. In the Services window scroll down to the bottom and double-click on the Windows Image Acquisition (WIA) Service. 4. Select the STOP option. 5. Click the START option to restore the service. 6. Try scanning again into Paint. If it scans fine, try scanning from the application that you normally use. If you are still unable to scan or receive any error messages, try reinstalling the scanner driver or software.If you have Macintosh operating system, please check Apple System Profiler if your scanner is properly detected. The reinstall the scanner driver.If your scanner is still undetected, please contact your scanner manufacturer for any possible driver updates.

Troubleshooting Paper Reversal in Printers: *Confirm that options related to paper handling are set correctly by checking for specific buttons or switches that relate to paper handling or reversing. *Ensure that paper is loaded properly to avoid feeding problems. *Remove any dust, particles, or paper remnants from the rollers, as they can impede paper flow. *If other measures fail, reset the printer to its initial settings to resolve potential software glitches.

If you take is apart you may find jammed gears or dry lubricant causing a 'paper jam', due to its age and storage.

Try a hard reset of the printer. Oddly, the 034019 is not an error code, I have reason to think. It is a contact number, I believe.

Follow the steps given below to reset Epson L382 printer. Step 1: Turn the printer off. Step 2: Press and hold the reset button which is on the back of the printer using a paper clip or tip of a pen. Step 3: Turn on the printer by holding the Power & reset button and continue to hold both the buttons. Step 4: Wait for 5 seconds and a warning sheet will print. Release the reset button. Step 5: After 5 seconds, another sheet will print which will show the IP address of the printer. hold the reset button which is on the back of the printer using a paper clip or tip of a pen. WHERE IS RESET BUTON? I CANT FIND IT.

I have the code on I dtf printer 43 H : Head Teperaturer