Panasonic Panafax UF-595 Plain Paper Laser Fax - Answered Questions & Fixed issues

error 406 means you or the person your trying to fax has a password on the machine so you need to looking at that.,

You need to replace the backup battery located on the main printed circuit board. These are usually soldered onto the board but some have receptacles which make replacement easier.

Hi, Error (004) as displayed in your printer refers to the option setting (output tray) that you set in your printer properties in your PC. (Assuming you are running WinXP) Start. Printers & Faxes, Right click on PX 150 and click pproperties, Printing Preferences. Set output tray. More details are availbale from http://panasonic.co.jp/pcc/products/en/mfp/download/dp-c322/ps/opc3psen.pdf Hope this works out for you. Godd luck

Hello,
according to the product specs it does. Its suppose to support Scan to email and Network Scanning.
If you are interested in get to know all the features and how to use them, you can get information HERE.
Hope this helps, if you have any query, let me know.

Open the ADF door and clean rollers and ADF pad with windex sprayed onto a paper towel , if problem remains call service tech to replace parts required.

Hi, machine error/info codes usually require service. Attempting the following involves some risk, you may loose complete access to your unit or not do anything at all. It is strongly recommended that you call a qualified service personnel/professional. However, if you feel like giving it a try while praying..... reset the system: Power on, wait for a minute or two, Function button, 7 (keypad), Monitor button (4X), soon as you hear the beep punch * (keypad). You will now be in the service menu. If no service menu, stop, do not power off, unplug. If in service menu, 7 (keypad), Set, go to Reset Option (arrow down one step), Set. Unit will prompt you to reset, press 1 for yes, system will confirm that it has completed resetting. Go back to main menu (Stop button), power down, wait again for a minute or two, power up. Please remember that resetting may, can and will erase all your personal settings and preferences including day/date/time, etc. The above steps may make your unit completely useless. If still you have the 021 code, you can brute force it to reset. Power on without a toner cartridge. In self-test, it will check itself and reset many functions to determine faults (including toner cartridge and your code 021). Wait again for a minute or two, Power off, reinseert the toner cartridge, wait again for a minute or two, and power up. If all else fails (including the prayer) pls go back to the first paragraph. The above steps are not mine but were described by a good samaritan. Hope this works out for you and lots of luck.

It is on the top edge of the black panel, next to the blue slider, pull up and out

You have installed a defective toner cart. Many bad ones out there

When did you replace the toner crg?
It may be that drum isnt turning, and when paper comes to the drum it jams.
New crg should resolve the problem.

But you also want to check the pick up, feed and separation rollers.

You probably have a piece of paper wrapped around the fuser roller. You will need to call a technician

press

Function
7
monitor key slowly 4 times
* star key
6
scroll down to SHIPMENT SET
set
2


wait for machine to reinitialize

Staples or Office Depot

Press

Function
7
monitor key slowly 4 times
* star key
6

scroll down to ALL JOB CLEAR
set

wait for the machine to reboot.

Press

Function
71
set
key in the date and military time
set
stop

press

Function
7
monitor key slowly 4 times
* star key
6
scroll down to ALL JOB CLEAR
set
wait for a reboot, about 2 mins.

Your fax machine most likely is not finding a dial- tone, so faxes are piling up in memory and are never being transmitted.

After the reboot, press the monitor key once and listen for the dial-tone.

Pull out the gray tab on top of the operating panel next to the blue lever. The battery is a CR2032.

Your toner cartridge is leaking toner onto the transfer roller. There is no cure except for replacing the cartridge.

press

Function
7
monitor key slowly 4 times
star key *
6
scroll down to SHIPMENT SET
set
2

wait for the machine to intialize

The other fax machine is not answering.

The fax machine you are sending to is not recognized as a fax machine.