20 Most Recent
Panasonic KX-FL511 Plain Paper Laser Fax - Page 4 Questions & Answers
Fax machine print light
When you see light print it can be from a few things. This is basically a laser printer with a fax machine so the same problems exist in both. The most common cause by far is simply low toner. If you take out the toner cartidge and gentl shake it side to side then put it back in. Now try printing again. This should be much darker. This may only last a few dozen pages (but can go a quite a bit more if you are lucky) but it shows you that you need to get a new toner cartridge. The other causes can be a image setting in the fax. In the control panel it will show you a setting for how dark it will print. Normally it is in the middle of the range. The last common thing is a fusor wire. This normally shows up as a error first but it can slowly fail. The fusor is the heater that bonds the toner to the paper. If it doesn't get hot enough then not all the toner sticks and you get light printing.Normally the problem is low toner.
1/25/2012 4:28:33 PM •
Panasonic...
•
Answered
on Jan 25, 2012
How do I clear the 1 new call message
Hi, I get the same thing when I have my fax on and I also have a answer machine connected to my phone if I shut off the answering machine the call messages dont show .Another thing I didnt mention is I use my own phone # as my fax # so if someone faxes me I have to shut the answer machine off or the fax wont come through.So if you are set up like I am this is why you get new call messages on your machine
1/22/2012 10:07:01 PM •
Panasonic...
•
Answered
on Jan 22, 2012
Not finding what you are looking for?