Panasonic KX-FHD331 Plain Paper Thermal transfer Fax - Answered Questions & Fixed issues

I have a problem with the fax machine in question is panasonic kx ft77 . When receiving a fax error expel warm up and stop receiving the document. Or does anyone know what the problem is and how to fix it ? Thanks in advance

Most likely the scanner window needs to be cleaned. Dirt will cause black lines in the fax.

If you run out of ink, paper, or the machine jams the fax will be stored in memory. After these conditions are cleared the "stored fax" will print and automatically clear from memory. You can download the manual here ... http://pdf.textfiles.com/manuals/FAXMACHINES/Panasonic%20KX-FHD331%20Plain%20Paper%20Fax.pdf

needed to reset,

press menu,#9000*550 and start,is all.

Very Very Urgently : please tel me what i can do when my fax's paper don;t read good when i send it to other side ?

hp laser jet professional m1213 nf mfp fax error repot storage full

any problem in fax machine call helpline 9448311575 bangalore door step service

fax help line 9448311575 bangalore india

push menu,#9000*550set

replace thermal transfer roll.

COMMUNICATION ERROR (Code: 43, 44) means that "A line problem occurred". There might be a problem with the phone jack where your fax machine is connected to. Try to connect the telephone line cord to a different jack and try again.

Panasonic KX-FHD331 has Receive Mode Button (Just beside Display screen)at the top control pannel, as shown below: -


Press the button "RECIEVE MODE" Button and set the Fax to "FAX MODE ONLY" and the fax will automatically answer the calls in your absence. For further information you may refer to Page-52 of the Operating Instructions Manual.
Let me know if any further clarification/ assistance is required.
Hope it helps! Good Luck!
Don't forget to convey your feedback
CreativeTECH

there is no memory in that fax machine. it prints out directly.

OK...I'll ask a dumb question....have you tried to make a copy on your machine.???? If the pages are still blank, just a thought would be to check that you havn't installed the roll of paper in upside down.

try unplugging the power cord for 5 mins.

The memory is full of received documents due to a lack of paper, or a paper jam.

Install paper or clear the jammed paper.

or, unplug the unit for about 5 minutes.

or, to clear the RAM, try one of these procedures:

(If the first one doesn't work, try the next one)


1.

Press menu 7 dial dial dial dial * 6 start
Press up-arrow key until the display reads shipment set then press start
The display will read reset counter
Select yes or no then press start


2.

Press # 7 dial dial dial dial * 6 enter
Press up-arrow key until the display reads shipment set then press start
The display will read reset counter
Select yes or no then press start
.

3.

Press standby set dial dial dial dial * 6 start 9 9
On success, a long beep will be heard


4.

Press menu 7 monitor monitor monitor monitor * 6 start
Press up-arrow key until the display reads shipment set then press start
The display will read reset counter
Select yes or no then press start



Parameter 65 for memory collation should be set to invalid to maximize the memory page rating

Unplug the power cord for 1 hour

Unplug the power cord for 10 seconds

Hello :

If you mean change then :


1: Turn the power off on your fax machine.

2: Open the front or top control panel Make sure not to force the door open.

3:Locate the ink cartridge. Gently pull the cartridge out. Set the cartridge aside.

4:Take the new cartridge out of the package and reserve the packaging. Remove the protective covers over the copper connectors.

5:Insert the new cartridge into the fax machine with the brand label toward you. Now place the old cartridge into the plastic wrapping and box that you reserved from the new cartridge. Recycle the old cartridge or dispose of it in the garbage.

6:Close the fax machine's access panel. Turn the fax machine's power back on.

Warning:
1:Touching the copper connectors on the ink cartridge could damage the cartridge. 2:Make sure that you purchase the correct cartridge for your fax machine. Purchasing the wrong one could damage the cartridge or your fax machine. good luck . please don't forget to rate !

just go change code then unit will ask you to enter your code . enter 726276642 then enter your new pass word