20 Most Recent Panasonic RR-930 Desktop Cassette Transcriber / Recorder - Page 6 Questions & Answers

have a look for all swollen caps and replace as needed for a start

Replace the laser assembly.

Try this website for an online copy of the manual. https://www.manualslib.com/products/Panasonic-Sapt480-Dvd-Home-Theater-Sound-System-2754226.html

Turning a wired speaker into a wireless speaker would be difficult and disproportionately expensive. Each amplifier channel will need a transmitter and each speaker a receiver, a preamplifier and power amplifier and a power source capable of supplying the whole for a reasonable time before recharging. If you choose wireless (radio) to transmit to each speaker the frequencies will have to be adjusted so they don't conflict. If the speakers are to be used within sight of the base then infrared transmitters and receivers could be the answer, similar to that used with some of the early wireless headphones.

You will have to disassemble the unit to gain access for removal.

1. Open internal fuse 2. Power supply failure

Possibly because components in the amplifier chains have been overstressed and consequently failed. The output stages are frequently affected by high gain levels.

https://www.google.com/search?q=replacement+Panasonic+SC+pm-01+remote ..

It it worked before, you need the amplifier servicing. You have blown components by overloading it.

Possibly a blown channel causing it to enter safe mode or Wait mode.

Is the display not working completely? If it is working, What error code are you getting on display?

The drive must have a pin-hole in front. Use a needle/pin in that hole and press it. It may help to unlock the tray. Give that a try.

Hi i have penasonic vk90d after i service the unit . The unit is stuck on dvd but nothing works dvd tape fm aux nothing work the unit is stuck on dvd changer. Any body help me plz
[email protected].

No but you can buy another cable and join it together to rich the length that you need

I have one SA - EH700 which is 20 Years Old. It used to work fine but last time I've opened up the main amp. The control board was malfuntioning for those old switches. But during soldering out the bad switches , I accidently broke a 6.3v 100?F capacitor. I replaced the capacitor with same rating but my amp goes to fm mode after starting and the Mixer Tuner "SA - EH750" don't power up or sometime it powers up with wrong light patterns. (System Crash Type). I don't know what to do. Can someone help me out please?

Here is the troubleshooting section of the guide. It points to several things for you to check. https://www.manualslib.com/manual/119628/Panasonic-Sc-Vk680.html?page=34#manual See no response when any button is pressed. Oddly, it might be condensation.

Download the service manual from this site https://www.manualslib.com/manual/192205/Panasonic-Sc-Pm07.html

You maybe able to get a region free code from one of these WEB sites. REGION FREE CODES FOR DVD & BLU-RAY www.dvdexploder.com/ www.videohelp.com/dvdhacks www.download-info.com/dvd/index_new.htm http://www.dvddemystifiziert.de/codefree_en/codefree.html

The SB-WA350 is the sub-woofer for the SC-HT900 home theater system. See the manual here at Panasonic's support page, https://shop.panasonic.com/support-only/SC-HT900.html , or ManualsLib, https://www.manualslib.com/manual/266877/Panasonic-Sc-Ht900.html?page=2#manual . The manual lists the system cable as part K1HA25HA0001. I've found the cable listed at E-bay and here: http://salestores.com/pak1sucak1ha.html . However, Panasonic has discontinued the SC-HT900 and the cable is out of stock at most vendors. I hope this helps. Cindy Wells

i have 1 for you contact me on [email protected]