Sony VPL-EX1 Multimedia Projector - Answered Questions & Fixed issues
The projection is reverse
Go to MENU, INSTALL, and then use FLIP to reset the projected image to match with your installation.
4/20/2012 6:57:35 AM •
Sony VPL-EX1...
•
Answered
on Apr 20, 2012
•
45 views
Sony vpl-ex1 doesnt turn on.
the filter cover sometimes gets distorted and the small plastic dimple which presses against the switch doesnt activate correctly, check the lamp cover switch also.
11/4/2013 3:45:36 AM •
Sony VPL-EX1...
•
Answered
on Nov 04, 2013
•
792 views
I have changed the lamp
When you open the lamp cover for replacement of lamp there is a switch in the projector is OFF
If lamp cover not fix proper after replacement of lamp the lamp/cover indicator flashing
SOLUTION: Open the lamp cover and fix proper and tight the screw
9/8/2013 8:33:53 AM •
Sony VPL-EX1...
•
Answered
on Sep 08, 2013
•
1,565 views
Sony VPL-EX3 projector on/off switch
Possible that the lamp is faulty -if the hours have elapsed- check the lamp holder, the fitments.
check also the filters, clean and reset.
Make sure the power supply Unit is not having any poor soldering or faulty components to reduce the voltage output to the lamp thus making it shut down..
1/17/2011 11:07:09 AM •
Sony VPL-EX1...
•
Answered
on Jan 17, 2011
•
641 views
I have sony vpl-ex1 projctor
1.unplug power cord
2.plug back in and it should be in stand by mode.(red light on)
3.do not power on
4.on remote push RESET,LEFT ARROW,RIGHT ARROW AND ENTER(do it in less than 5 seconds)
5.after you have done this power on and go to menu and it should show lamp hours 0
6.if it didn't work just do it again, it took me a couple of tries.
1/6/2011 5:06:48 PM •
Sony VPL-EX1...
•
Answered
on Jan 06, 2011
•
521 views
How do i get rid of replace lamp message & reset lamp timer
If you are using the RM-PJ2 remote control, following these instructions. You will have 5 seconds to complete the key sequence.
1. Make sure the Projector is in "Standby" mode. There will be a red light instead of green
2. Press the Reset button
3. On the "joystick" type button, toggle the left directional arrow
4. On the "joystick" type button, toggle the right directional arrow
5. Press down on the "joystick" button to press Enter.
6. Your lamp hours should now be reset.
Recap: Reset, left arrow, right arrow, Enter, all within 5 seconds.
Good luck!
5/5/2010 3:24:16 PM •
Sony VPL-EX1...
•
Answered
on May 05, 2010
•
1,085 views
Everytime i switch it on it flashes lamp cover
Try replacing the lamp cover with a new one, if that does'nt work then it could be the sencor for the lamp cover, and if that does'nt work then contact your sony dealer and see what they can do.
2/13/2010 10:12:38 AM •
Sony VPL-EX1...
•
Answered
on Feb 13, 2010
•
339 views
VPL-EX1
I have had the same problem with 3 Sony VPL-EX1s and Sony will not answer emails regarding the problem. Hence I wont be purchasing Sony projectors again.
11/19/2009 1:48:10 PM •
Sony VPL-EX1...
•
Answered
on Nov 19, 2009
•
438 views
Need asistent
my sony vpl ex3 will not light up, has a lamp/cover light on all the time can somebody help
7/3/2009 7:55:29 AM •
Sony VPL-EX1...
•
Answered
on Jul 03, 2009
•
680 views
Green hue on screen
Hi there
If this shows on the image without a signal ( PC or Video ) then it could be one of your LCD's that need replacement
3/26/2008 12:37:53 PM •
Sony VPL-EX1...
•
Answered
on Mar 26, 2008
•
311 views
Blue Screen
Select the menu and go to the input selection. set it to Computer. or manually press INPUT.
6/4/2007 3:51:54 PM •
Sony VPL-EX1...
•
Answered
on Jun 04, 2007
•
210 views
Not finding what you are looking for?